Özet:

The method of electroosmoz is one of the methods successfully applied for 50 years on the increase in resistance and deformation characteristics in soil, such as thin thin and silk. This method is applied in the form of ensuring the right movement of the empty water from the empty (+) to the empty (-) in a problem-suitable ground environment, by giving a direct flow between the points specified as anot and catot. In this application, the water that begins to gather in the catot is pumped out and the front of the water that can come in the anot is cut, this situation is established by a consolidation mechanism with the release of the vacuum water at a certain time. The application is also useful to point out that the saturated silk and silk kills are normally consolidated and the empty water can be efficient if the rate of erosion is low. During this application, a direct water flow will be formed from the anot to the cat, and if the liquid with the stabilization enhancement and desired properties is left on the anot side, an additional chemical stabilization on the ground will also be subject to. The ice cream method was first used 100 years ago. In the method, the water in the ground is cooled until it is frozen, so a non-sustainable ground with greater resistance is obtained. The sliding strength of frozen soils is higher than the parameters of unfrosted soils. This method can be used in cases where the ground needs to be healed for a short period of time. Therefore, the freezing method, in short-term ensuring the stability of the shells, in cases where the basic hole needs to be kept dry, etc. It is a useful method. The method of heating from heating processes is closely related to the lowness in which the soil has sliding resistance parameters. If the boundaries are close to the liquid limit, the sliding resistance is significantly reduced. Reduction of water in the environment can be achieved by heating the ground at high temperatures. When the killer is heated to 400-600 oC, it silicates and changes phase by turning into clinkes at 900 oC. In this case, the killers are changing enough to not get their bodies rotubet.

Anahtar Kelimeler: