Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
  Atıf Sayısı 2
 Görüntüleme 11
 İndirme 2
Studying the excitation of resonance oscillations in a rotor on isotropic supports by a pendulum, a ball, a roller
2019
Dergi:  
Eastern-European Journal of Enterprise Technologies
Yazar:  
Özet:

We have analytically examined the steady motion modes of the system, composed of a balanced rotor on the isotropic elastic-viscous supports, and a load (a ball, a roller, a pendulum), mounted inside the rotor, thus enabling its relative motion. In this case, the pendulum is freely mounted onto the rotor shaft, while the ball or roller rolling without slipping along a ring track centered on the longitudinal axis of the rotor. The physical-mathematical model of the system has been described. We have recorded differential equations of the system’s motion with respect to a coordinate system rotating at a constant speed of rotation in the dimensionless form. All steady motion modes of the system have been defined under which a load rotates at a constant angular velocity. In the coordinate system that rotates synchronously to a load, these motions are stationary. Our theoretical study has shown that under motion steady modes: – in the absence of resistance forces in the system, a load rotates synchronously with the rotor; – in the presence of resistance forces in the system, a load is lagging behind the rotor. The load jamming regimes are the one-parameter families of steady motions. Each jamming mode is characterized by the corresponding jam frequency. Depending on the system parameters, one, two, or three possible load jam velocities may exist. If, at any rotor speed, there is only a single angular velocity of a load jam, then the corresponding motion mode (a one-parameter family) is globally asymptomatically steady. If the number of jam velocities varies depending on the angular rotor speed, the asymptomatically steady are: – the only existent mode of jamming (globally asymptomatically steady when there are no others); – jamming modes with the smallest and greatest velocities.A load jam mode with the lowest angular velocity (close to resonance) can be used in order to excite resonance oscillations in vibration machines. The highest frequency of a load jam is close to the rotor speed. This mode can be used to excite the non-resonance oscillations in vibration machines Author Biographies Volodymyr Yatsun, Central Ukrainian National Technical University Universytetskyi ave., 8, Kropyvnytskyi, Ukraine, 25006 PhD, Associate Professor Department of Road Cars and Building

Anahtar Kelimeler:

Atıf Yapanlar
Dikkat!
Yayınların atıflarını görmek için Sobiad'a Üye Bir Üniversite Ağından erişim sağlamalısınız. Kurumuzun Sobiad'a üye olması için Kütüphane ve Dokümantasyon Daire Başkanlığı ile iletişim kurabilirsiniz.
Kampüs Dışı Erişim
Eğer Sobiad Abonesi bir kuruma bağlıysanız kurum dışı erişim için Giriş Yap Panelini kullanabilirsiniz. Kurumsal E-Mail adresiniz ile kolayca üye olup giriş yapabilirsiniz.
Benzer Makaleler










Eastern-European Journal of Enterprise Technologies

Alan :   Fen Bilimleri ve Matematik

Dergi Türü :   Uluslararası

Metrikler
Makale : 4.764
Atıf : 4.485
2023 Impact/Etki : 0.294
Eastern-European Journal of Enterprise Technologies