Views
15
Nikel esaslı süper alaşımlar gaz türbinleri, nükleer reaktörler, jeneratörler gibi geniş bir kullanım alanına sahiptir. Mekanik dayanım ve korozyon direncinin önemli olduğu alanlarda özellikle tercih edilirler. Sıcak korozyon, yüksek sıcaklık uygulamalarında oldukça yıpratıcı bir hasar türüdür. Sıcak korozyonda, erimiş tuzlar reaktif bileşenlerle kolayca reaksiyona girer ve iş parçalarında erken hasara neden olur. Bu çalışmada, nikel bazlı süper alaşım olarak Inconel 718, sıcak korozyon testlerine tabi tutulmuştur. % 50 V2O5-50% Na2SO4 karışımları korozyon bileşeni olarak kullanılmıştır. 900 ° C’ de, 18 saat süreyle çevrimli ve izotermal sıcak korozyon testleri uygulanmıştır. Inconel 718’ de oluşan korozyon ürünleri ve mikroyapısal değişiklikler, sıcak korozyon testlerinden sonra taramalı elektron mikroskobu (SEM), SEM-Enerji Dağılımlı X-Işını (EDX), SEM-haritalaması ve X-Işını Kırınımı (XRD) analizleri ile karakterize edilmiştir.
Super alloys based on nickel have a wide range of uses such as gas turbines, nuclear reactors, generators. They are especially preferred in areas where mechanical resistance and corrosion resistance are important. Hot corrosion is a very destructive type of damage in high temperature applications. In hot corrosion, eradicated salts easily react with reactive components and cause early damage to work parts. In this study, Inconel 718 was tested for hot corrosion as a nickel-based super alloy. 50% V2O5-50% Na2SO4 is used as a corrosion component. At 900 ° C, round and isothermal hot corrosion tests have been applied for 18 hours. The corrosion products and microbuilding changes in Inconel 718 are characterized by the scan electron microscope (SEM), SEM-Energy Distributed X-Work (EDX), SEM-Mapping and X-Work Break (XRD) analysis after hot corrosion tests.
Nickel-based superalloys have a wide range of usage area such as gas turbines, nuclear reactors, generators. They are especially preferred in areas where mechanical strength and corrosion resistance are important. Hot corrosion is a highly corrosive type of damage in high temperature applications. In hot corrosion, molten salts easily react with reactive components, causing premature damage to the workpieces. In this study, Inconel 718 was subjected to hot corrosion tests as a nickel-based superalloy. 50% V2O5-50% Na2SO4 mixtures were used as corrosion salt. Cyclic and isothermal hot corrosion tests were carried out at 900 ° C for 18 hours. Corrosion products and microstructural changes formed in Inconel 718 were characterized by scanning electron microscopy (SEM), SEM-Energy Dispersive X-Ray (EDX), SEM-mapping and X-Ray Diffraction (XRD) analysis after hot corrosion tests. At the end of the isothermal and cyclic hot corrosion tests, Inconel 718, which has been subjected to cyclic hot corrosion, has been found to be more affected by the damage. Similar results were observed in terms of the corrosion products and the damage mechanism.
Journal Type : Ulusal
Article Detail 
Similar Articles
Download PDF
Journal Information
Listen Paper
Cite
Print This Page
Share
Mendeley
