Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
  Atıf Sayısı 1
 Görüntüleme 20
Determining the rational parameters for processing spent etching solutions by ferritization using alternating magnetic fields
2022
Dergi:  
Eastern-European Journal of Enterprise Technologies
Yazar:  
Özet:

This paper reports the results of studying the application of a ferritization method for the integrated purification of used etching solutions. A feature of this work is the use of energy-saving activation of the process by alternating magnetic fields. Its advantages are shown in comparison with traditional thermal activation. The influence of magnetic induction amplitude and key technological parameters of ferritization on the quality of cleaning an etching solution has been studied. The qualitative and quantitative composition of sediments obtained after the ferritization of etching solutions was investigated. Used etching solutions are large-tonnage waste of industrial enterprises. They contain harmful pollutants that have a detrimental effect on the environment. It is promising to treat these solutions in order to obtain valuable commodity products. It is established that with an optimal value of magnetic induction amplitude of 0.1 Tl, the degree of extraction of iron ions from the solution reaches a value of 99.99 %. The best values for the main technological parameters of the process have been determined: the concentration of iron ions in the reaction mixture is 6.6 g/dm3; pH, 11.5; the duration of ferritization is 15 min. The residual concentration of iron ions in purified solutions does not exceed 0.3 mg/dm3. Thus, according to the norms of current standards, they can be reused in production. Comparative analysis indicates the advantages of electromagnetic activation of the reaction mixture. The phases of magnetite Fe3O4 and iron monohydrate δ ‒ FeOОН were detected by the method of X-ray phase analysis in ferritization sediments. It is established that with an amplitude of 0.1 Tl, the sediment contains only magnetite. The study's results indicate the possibility of further use of sediments for the manufacture of important ferromagnetic substances. The application of the improved ferritization process in production will achieve less energy consumption compared to well-known processing technologies Author Biographies Gennadii Kochetov, Kyiv National University of Construction and Architecture Doctor of Technical Sciences, Professor Department of Chemistry

Anahtar Kelimeler:

2022
Yazar:  
Atıf Yapanlar
Dikkat!
Yayınların atıflarını görmek için Sobiad'a Üye Bir Üniversite Ağından erişim sağlamalısınız. Kurumuzun Sobiad'a üye olması için Kütüphane ve Dokümantasyon Daire Başkanlığı ile iletişim kurabilirsiniz.
Kampüs Dışı Erişim
Eğer Sobiad Abonesi bir kuruma bağlıysanız kurum dışı erişim için Giriş Yap Panelini kullanabilirsiniz. Kurumsal E-Mail adresiniz ile kolayca üye olup giriş yapabilirsiniz.
Benzer Makaleler












Eastern-European Journal of Enterprise Technologies

Alan :   Fen Bilimleri ve Matematik

Dergi Türü :   Uluslararası

Metrikler
Makale : 4.764
Atıf : 4.485
2023 Impact/Etki : 0.294
Eastern-European Journal of Enterprise Technologies