Özet:

The influence of composite materials of ethylene-vinyl acetate copolymer that do not maintain combustion and fire-retardant fillers on thermophysical processes was explored. Ethylene-vinyl acetate copolymer was used in the studies. The content of vinyl acetate is 18 % and 28 %; MFI is 2.5 g/10 min. and MFI is 5 g/10 min. Fire retardant fillers included aluminum oxide trihydrates with average diameter of particles of 1.5 µm and 3.0 µm; magnesium oxide dihydrates with average diameter of particles of 3.0 µm and 3.7 µm and hydromagnesite with average diameter of particles of 1.4 µm. Using the method of thermogravimetric analysis and differential scanning calorimetry TGA/DSC, temperatures of vitrification, melting and decomposition, crystallinity degree, specific thermal capacity, and activation energy were determined. It was found that temperatures of physical transformations (temperatures of vitrification, melting, and decomposition) of polymer compositions that do not maintain combustion depend on properties of ethylene-vinyl acetate copolymer. They increase with decreasing of fluidity indicator of copolymer of ethylene vinyl acetate. EVA 1 has lower values of the indicator of melt fluidity and content of vinyl acetate than EVA 2. During an increase in content of fire retardant fillers, temperatures of physical transformations are shifted in the direction of increasing: vitrification temperature increases from – 85 °C to 53 °C, melting temperature – from 68 °C to 90 °C. At the same time, crystallinity degree decreases from 8.8 % to 1.0 % and specific thermal capacity increases from 0.4 to 8.6 J/gK. This is due to formation of supermolecular structure of the derived compositions. The influence of the polymeric matrix, composition and dispersity of fire retardant fillers on thermal-physical characteristics of polymeric compositions was determined. In case of using a polymer matrix with lower MFI and fire retardants fillers with smaller average diameter of particles, temperature characteristics are shifted towards higher temperatures than in the case of selection of polymer matrix with large MFI and fire-retardant fillers with a larger diameter of particles. Obtained results will be useful during development of formulations of polymer compositions that do not maintain combustion for cable products, considering their thermophysical characteristics.  Author Biography Olena Chulieieva, PJSC «YUZHCABLE WORKS» Avtohenna str., 7, Kharkiv, Ukraine, 61099 PhD, Chief specialist for Polymeric Materials Science and Technology Center 

Anahtar Kelimeler: