Çalışma ofisi ortamlarında, gerekli konfor koşulları sağlanarak insanların rahat olabilmesi insanların sağlık ve iş performansı bakımdan önem arz etmektedir. Uygulamada bu şartların en verimli bir şekilde gerçekleştirilmesi açından iklimlendirme sistemlerinin uygun tasarlanması zorunlu olmaktadır. Bu nedenle bu çalışmada, kış ayları için istenilen hava hızları ve sıcaklık dağılımları için menfezlerin en verimli konumu FLUENT-ANSYS programı ile simüle edilerek araştırılmış ve sonuçlar gözlemlenmiştir. Bu amaçla kabin tipi ofis için üfleme ve emme menfezi yerleşimleri için dört farklı model oluşturulmuştur. Her model için iklimlendirilmiş havanın ofise giriş hızları 0.5 m/s, 1 m/s, ve 2 m/s alınarak belirlenen dış hava ortalama sıcaklıklarına göre analizler yapılmıştır. Analizde her model için sıcaklık ve hız dağılımları belirlenmiştir. Çalışmanın sonucunda kabin tipi ofisler için en uygun iklimlendirmenin tavandan üfleme ve yan duvarlarda emme menfezlerinin olduğu tasarım olduğu görülmüştür.
In the work office environments, providing the necessary comfort conditions for people to be comfortable is important for people in terms of health and work performance. In implementation, it is necessary to properly design air-conditioning systems in terms of the most efficient fulfilment of these conditions. Therefore, in this study, the most efficient location of spots for the desired weather speeds and temperature distribution for the winter months was studied by simulating with the FLUENT-ANSYS program and the results were observed. For this purpose, four different models have been created for floating and empty mountain settings for cabin type offices. For each model, the air-conditioned air’s office entrance speeds are taken by 0.5 m/s, 1 m/s, and 2 m/s, and the average temperature of the air is determined. The analysis determines the temperature and speed distribution for each model. The study has shown that the most suitable air conditioning for cabin-type offices is the design of floating from the roof and emptying spots on the side walls.
Alan : Fen Bilimleri ve Matematik; Mühendislik
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|