Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
  Atıf Sayısı 4
 Görüntüleme 14
 İndirme 3
A study of the possibility of conducting selective laser processing of thin composite electrochromic Ni(OH)2-PVA films
2021
Dergi:  
Eastern-European Journal of Enterprise Technologies
Yazar:  
Özet:

The surfaces of thin composite electrochromic Ni(OH)2-polyvinyl alcohol films, deposited by the cathodic template method on FTO glass substrates, were proposed to be processed using laser radiation. The processing of these films was carried out in a colored state with a laser beam of a semiconductor emitter with a wavelength of 650 nm (red) with a pulse duration of 3,000 μs, the beam diameter was about 40 μm. The energy at a single point was 37.5 J/cm2. The result was a film with microholes of about 80 μm. The transparent areas of the surface did not exhibit electrochromic properties, which indicated the absence of the original electrochromic coating. The study of the properties of the laser-processed film following a certain pattern showed that the characteristics of composite Ni(OH)2-polyvinyl alcohol coatings had changed significantly. On the one hand, the coloration depth of the films decreased by several percent, on the other hand, the specific electrochemical characteristics increased significantly. The study also showed that laser processing did not lead to significant changes in the main properties of the transparent electrically conductive layer – color and resistance. Before and after laser processing, the surface resistance of FTO glasses was 12.1±0.9 and 14.4±1.2 Ohm/sq., respectively.  In addition, it was found that the processing of Ni(OH)2-polyvinyl alcohol films improved the adhesion of the latter to the surface of FTO glass. Based on the data obtained, a selective method was proposed for modifying thin colored films deposited on transparent conductive oxides (FTO, ITO, AZO) by visible laser radiation. This approach to changing the properties of films can be useful for areas related to the development of sensors, microelectronics, solar cells, small-sized current sources, electrodes with high efficiency, etc. Author Biographies Valerii Kotok, Ukrainian State University of Chemical Technology; Vyatka State University PhD, Associate Professor Department of Processes, Apparatus and General Chemical Technology Senior Researcher Competence center "Ecological technologies and systems"

Anahtar Kelimeler:

null
2021
Yazar:  
0
2021
Yazar:  
Atıf Yapanlar
Dikkat!
Yayınların atıflarını görmek için Sobiad'a Üye Bir Üniversite Ağından erişim sağlamalısınız. Kurumuzun Sobiad'a üye olması için Kütüphane ve Dokümantasyon Daire Başkanlığı ile iletişim kurabilirsiniz.
Kampüs Dışı Erişim
Eğer Sobiad Abonesi bir kuruma bağlıysanız kurum dışı erişim için Giriş Yap Panelini kullanabilirsiniz. Kurumsal E-Mail adresiniz ile kolayca üye olup giriş yapabilirsiniz.
Benzer Makaleler












Eastern-European Journal of Enterprise Technologies

Alan :   Fen Bilimleri ve Matematik

Dergi Türü :   Uluslararası

Metrikler
Makale : 4.764
Atıf : 4.485
2023 Impact/Etki : 0.294
Eastern-European Journal of Enterprise Technologies