Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 14
 İndirme 3
PARAMETRIC EFFECTS ON THE PERFORMANCE OF AN INDUSTRIAL COOLING TOWER
2021
Dergi:  
Journal of Thermal Engineering
Yazar:  
Özet:

Sensible and latent heat rejection from heat engines is of high necessity for system efficiency and continuous production. The cooling tower is one of the major heat-exchanging systems used for cooling industrial heat systems by intimately mixing hot water with cooling air. Optimal operating conditions and parameters of the system are highly essential for its effectiveness and efficiency. This study used the Poppe model to evaluate selected thermodynamic relations of a rectangular counter-flow industrial cooling tower of a steel rolling mill using the system’s inlet and outlet data as initial conditions. The effect of increasing the water temperature on the air moisture content, Merkel number, and specific enthalpy was studied across the fills of the cooling tower. Air moisture content, Merkel number and specific enthalpy of the system increase with increasing water temperature. However, while other variables reach a stationary point at half the nodal segments, the specific enthalpy increases across the fills in the system. It was concluded that the use of nano particles with high heat removal rate could increase the efficiency of the system. Also, an increase in the quantity of the makeup water of a force draft system is recommended towards increasing the system efficiency.

Anahtar Kelimeler:

null
2021
Yazar:  
0
2021
Yazar:  
Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler








Journal of Thermal Engineering

Alan :   Mühendislik

Dergi Türü :   Uluslararası

Metrikler
Makale : 493
Atıf : 243
2023 Impact/Etki : 0.05
Journal of Thermal Engineering