Saydam İletken Oksit (SİO) ailesine ait olan ZnO filmleri, kendine has özellikleriyle güneş pili teknolojilerinde dikkat çeken malzemelerdir. Bu malzemelerin uygun alttaşlar üzerine ekonomik bir teknik ile üretilmesi aygıtların üretim maliyetini ve verimini önemli derecede etkileyecektir. Bu çalışmada, alttaş olarak sıklıkla kullanılan mikroskop camlarına alternatif olarak farklı oranlarda PbO içeren borat cam yapıları üzerine ultrasonik kimyasal püskürtme tekniği ile ZnO filmleri çöktürülmüştür. Üretilen filmlerin yapısal, elektriksel ve optik özellikleri incelenerek, alttaş olarak kullanılan cam yapıların film özellikleri üzerine etkisi araştırılmıştır. Tüm bu araştırmalar sonucunda; alttaş olarak kullanılan cam yapılardaki Pb miktarının artması ile kristal yapılarında değişme olduğu gözlenmiştir. PbO içeren alttaşlar üzerine üretilen filmlerin elektriksel özdirenç değerleri, PbO içermeyen camlara kıyasla daha yüksektir. Görünür bölgedeki en yüksek geçirgenlik %5 PbO içeren cama aittir ve alttaş yapısına PbO ilavesi üretilen filmlerin kırılma indisi değerlerini artırmıştır.
ZnO films, which belong to the Saydam Importive Oxyde (SIO) family, are materials that attract attention in solar battery technologies with their own characteristics. Production of these materials with a cost-effective technique on the appropriate substrates will significantly affect the cost of production and efficiency of the equipment. In this study, ZnO films with the ultrasonic chemical spray technique on borate glass structures containing PbO in different proportions as an alternative to the microscopic glasses commonly used as a substrate were collapsed. By studying the structural, electrical and optical characteristics of the produced films, the impact of the glass structures used as substrate on the characteristics of the film has been studied. All of these researches have shown that the amount of Pb in the glass structures used as a substrate has increased with a change in the crystal structures. The electrical isolation values of the films produced on substrates containing PbO are higher than the glasses that do not contain PbO. The highest tolerance in the visible area belongs to the 5 % PbO-containing layer, and the PbO added to the undertaking structure has increased the breakdown index values of the films produced.
Alan : Fen Bilimleri ve Matematik; Mühendislik
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|