Bu çalışmada, kütlesel rastgelelikle elde edilen yapısal belirsizliğe sahip çizgisel bağlı kompozit yapıların orta ve yüksek frekans titreşim analizi için bir modal empedans tabanlı istatistiksel enerji analizi (İEA) yordamı sunulmuştur. Önerilen yaklaşım her bir altsistemin modal bilgilerini elde ederek sonlu sistem empedanslarını hesaplar ve bu empedansları İEA parametrelerinin tahmin edilmesinde kullanır. Modal bilgiler, her bir altsistemin tüm sisteme göre yaklaşık fiziksel sınır koşulu benzerliğini de sağlayarak, sonlu elemanlar metodu (SEM) ile hesaplanır. Yöntem, klasik İEA yönteminin aksine sadece zorlama noktası sonsuz empedansını değil sonlu transfer noktasal empedanslarını da hesaba katarak, sonlu sistemin toplam enerjisini daha gerçekçi olarak ortaya koymaktadır. Bu yöntem çizgisel bağlantı empedanslarını elde etmek için, noktasal empedanslar üzerinden gerçekleştirilen bir boyut indirgeme prensibinden yararlanır. Burada yöntem, iki adet izotropik çubuk ve kütlesel rastgele değişkenliğe sahip sekiz tabakalı bir simetrik kompozit plakadan oluşan çizgisel bağlantılı bir güçlendirilmiş kompozit yapı ile test edilmiştir. Sunulan yaklaşımın doğruluğu ve başarısı sonlu elemanlar (SE) tabanlı Monte Carlo simülasyonları ve klasik İEA sonuçları ile ortaya konmuştur.
In this study, a modal empedance-based statistical energy analysis (IEA) procedure for the analysis of the medium and high frequency vibration of linear connected composite structures with massally randomly achieved structural uncertainty was presented. The proposed approach calculates the final system empedans by obtaining the modal information of each subsystem and uses these empedans to predict the IEA parameters. Modal information is calculated by the final elements method (SEM) by providing the approximate physical limit condition similarity of each subsystem to the entire system. The method, unlike the classic IEA method, more realisticly demonstrates the total energy of the final system, taking into account not only the endless empedans of the force point, but also the endless transfer point empedans. This method is used to obtain linear connection empedans, using the principle of a dimension reduction performed through point empedans. Here the method was tested with a linear-connected enhanced composite structure consisting of two isotropic bars and a eight layer symmetrical composite plate with a mass random variation. The accuracy and success of the proposed approach has been demonstrated by the final elements (SE) based Monte Carlo simulations and the classic IEA results.
Alan : Mimarlık, Planlama ve Tasarım; Mühendislik
Dergi Türü : Uluslararası
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|