Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 12
 İndirme 3
Managing the process of catalytic reforming by the optimal distribution of temperature at the reactor block inlets
2015
Dergi:  
Technology Audit and Production Reserves
Yazar:  
Özet:

In this paper it is investigated an influence of the temperature of the reaction mixture at the inlets of a catalytic reforming reactor block on increment of aromatic hydrocarbons at outlets of separate reactors. It is found that for each reactor of a catalytic reforming exists some optimal temperature of the initial mixture from the standpoint of the increment of aromatics, which does not exceed a noticeable increase of flavoring materials, however, increases the rate of deactivation of the catalyst due to the acceleration of hydrocracking reactions, contribute to the formation of coke on its surface. It is proposed the new method of finding the optimum point temperature at the reactor inlets, which provides optimum ratio of aromatization reactions and hydrocracking in reactors, depending on the desired rigidity of conducting the process. It is made a formulation of the problem of optimal control based on technical and economic analysis of the reforming unit of the Odessa refinery. A method to solve this problem based is proposed on the method of nonlinear Hooke-Jeeves optimization, supplemented by the procedure of border control of variable parameters. An algorithm for calculating the optimal process conditions and the control method based on it, which increases the yield of the desired product – the catalyzate an average of 3-5 %, which is confirmed by the results of experimental testing. Author Biography Игорь Леонидович Левчук, Ukrainian State University of Chemical Technology, Gagarin ave. 8, Dnepropetrovsk, Ukraine, 49005 Candidate of Technical Science, Associate Professor Department of Computer and Integrated Technology and Metrology

Anahtar Kelimeler:

Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler












Technology Audit and Production Reserves

Alan :   Fen Bilimleri ve Matematik

Dergi Türü :   Uluslararası

Metrikler
Makale : 2.454
Atıf : 270
2023 Impact/Etki : 0.047
Technology Audit and Production Reserves