Bu araştırmada, enerji bitkisi olarak dev kamış (Arundo donax) ve sazlık kamış (Phragmites australis) bitkilerinin briketlenmesi ve briketlerin fiziksel özelliklerinin belirlenmesi amaçlanmıştır. Materyallerin briketlenmesi için 15 kW gücünde konik kalıplı ve kalıp ısıtmalı konik helezon tip briketleme makinesi kullanılmıştır. Briketlerin fiziksel özellikleri ile ilgili olarak yoğunluk, dayanıklılık direnci, kırılma direnci, su alma direnci, nem içeriği ve eşdeğer nem içeriği değerleri belirlenmiştir. Ayrıca çalışmada, briketlerin ısıl değerleri, briketleme makinesinin kapasitesi ve özgül enerji tüketimi belirlenmiştir.Çalışma sonunda ortalama 57 mm çapında ve 25 mm merkez delikli yüzeyi karbonize olmuş silindirik briketler elde edilmiştir. Fiziksel testler sonunda briketlerin yüksek yoğunluk, dayanıklılık direnci, kırılma direnci, su alma direnci ve eşdeğer nem içeriklerinden dolayı oldukça sağlam yapıda oldukları belirlenmiştir. Dev kamış ve sazlık kamış bitkileri briketlerinin yoğunlukları sırası ile ortalama 1150 kg m -3 ve 1017 kg m -3, alt ısıl değerleri 17.99 MJ kg -1 ve 17.84 MJ kg -1 makine kapasitesi 170 kg h -1 ve 110 kg h -1, makinenin özgül enerji tüketimi ise 0.0753 kWh kg -1 ve 0.0841 kWh kg -1 bulunmuştur.
In this study, the aim of the energy plants is to bricle the giant cabbage (Arundo donax) and cabbage cabbage (Phragmites australis) plants and determine the physical characteristics of the cabbage. For the bricking of materials, a 15 kW power conic shaped and shaped conic helason type bricking machine has been used. In relation to the physical characteristics of the bricets, the intensity, resistance, break-up resistance, water absorption resistance, moisture content and equivalent moisture content values have been determined. In the study, the heat values of the brickets, the capacity of the bricking machine and the specific energy consumption were also determined.At the end of the study, the average 57 mm diameter and 25 mm central hole surface carbonized cylinder brickets were obtained. Physical tests ended with the fact that the bricets were in very solid structure due to their high intensity, resistance, break-up resistance, water absorption resistance and equivalent moisture content. With the intensity of the brickets of the giant cushion and cushion plants, an average of 1150 kg m -3 and 1017 kg m -3, the low heat values 17.99 MJ kg -1 and 17.84 MJ kg -1 machine capacity 170 kg h -1 and 110 kg h -1, the machine's specific energy consumption was 0.0753 kWh kg -1 and 0.0841 kWh kg -1 .
Alan : Ziraat, Orman ve Su Ürünleri
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|