Bu çalışmada standart bir demir-esaslı Toz Metal (TM) bakır çeliğinin (FC-0208) diğer TM proses parametrelerisabit tutularak, içerisindeki bakır oranı % 1-4 arasında 4 farklı kademede artırılarak üretimi yapılmış ve bunumuneler üzerinde delik delme talaşlı imalat testleri gerçekleştirilmiştir. Yapılan testlerde her bir malzemegrubunun işlenmesi esnasında oluşan itme-ilerleme kuvveti, takım aşınması ve deliklerin yüzey pürüzlülüğüölçülmüş, ayrıca talaş morfolojisini incelemek için optik fotoğrafları çekilmiştir. Çalışmanın amacı; artan bakıroranının, TM tekniğiyle üretilen bu malzemelerin talaşlı işleme sonucu oluşan takım aşınması ve onunla ilişkilitalaş oluşumuna etkisini deneysel olarak araştırmaktır. Sonuçlar, artan bakır oranının takım aşınmasını azalttığı,talaş oluşumunu iyileştirdiğini göstermiştir. Elde edilen kesme kuvveti ve yüzey pürüzlülüğü verileri de bunudestekler niteliktedir.
In this study, a standard iron-based powder metal (TM) copper steel (FC-0208) has been produced by keeping the other TM process parameters, increasing the copper ratio in it by 4 different stages from 1 to 4%, and manufacturing tests have been carried out with a hole-drying thumb on the thumbs. In the tests performed, the push-up force formed during the processing of each material group, the stretching of the set and the surface smoothness of the holes were measured, and optical photographs were taken to study the molar morphology. The purpose of the study is to experimentally investigate the impact of the increasing bakery on the creation of the equipment of these materials produced by the TM technique and the formation of association with it. The results showed that the increased amount of baker reduces the stretching of the cluster, heals the formation of clothes. The resulting cutting force and surface smoothness data are also a subsidy.
Alan : Mimarlık, Planlama ve Tasarım; Mühendislik
Dergi Türü : Uluslararası
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|