Atıf Sayısı
1
Görüntüleme
24
İndirme
4
Bu çalışmada, doğal boya olarak chantarelle (Cantharellus Cibarius), porcini (Boletus Edulis ) ve trumpet (Craterellus Tubaeformis ) yabani mantarların ekstraksiyon ürünleri kullanılmıştır. Cantharellus Cibarius, Boletus Edulis ve Craterellus Tubaeformis türlerinden mantarlar Bolu Mengen ilçesinden toplanmış, yıkandıktan sonra etüvde (40°C ± 2°C) 8 saat kurutulmuştur. Materyal olarak 160 denye % 100 ipek iplik kullanılmıştır. Boyamalarda kullanılacak ipek iplikler laboratuvar tipi boyama makinesinde (Termal) 20 g/l zeytinyağı sabun çözeltisi 1 saat kaynatılmış ve ardından materyale sıcak ve soğuk yıkama işlemleri yapılarak materyaller kurutulmuştur. Boyamadan önce ipek iplikler bakır sülfat, potasyum alüminyum sülfat, potasyum dikromat, kalay (II) klorür, demir (II) klorür ve demir (III) klorür ile mordanlanmıştır. Çektirme yöntemine göre, iplikler laboratuvar boyama makinesinde 60 dakika kaynama sıcaklığında boyanmış, flotte içerisinde soğutulmaya bırakılarak 12 saat sonra örneklere, soğuk taşar yıkama, sıcak yıkama, kaynar sabunlama ve soğuk durulama işlemleri yapılmıştır. Kurutma işleminden sonra renk koordinatları oluşturmak için spektrofotometre (Datacolor Spectra Flash 600 plus- D65/ 10°) ile renk ölçümleri gerçekleştirilmiştir. Boyanmış örneklerin yıkama, sürtme ve ışık haslıkları incelenmiştir. Sonuç olarak: Mordan maddelerinin, toplam renk farklılığı (ΔE*) değişiminde etkili olduğu belirlenmiş ve en yüksek toplam renk farklılık değeri, bakırsülfat mordanının kullanıldığı boyamada elde edilmiştir. (ΔE*=10.2884). Açıklık – koyuluk (ΔL*) eksenine göre renk değerlendirilmesinde, potasyum bikromat ile mordanlanmış örnek dışında, diğer boyamalarda renk standarttan daha açık elde edilmiştir. Chantarelle, porcini ve trumpet mantarlarlarından elde edilen boyarmaddeler ile ipekli materyalin boyanmasında Renk Kuvveti (K/S) değerleri karşılaştırıldığında; en iyi renk veriminin demir (II) klorür ile mordanlandıktan sonra porcini mantarından elde edilen doğal boya ile boyanmış ipek materyalde elde edildiği görülmektedir. Mordansız boyama ve demir (III) klorür, potasyum dikromat ve kalay klorür mordanları ile yapılan tüm boyamalarda renk verimi oldukça düşüktür. Porcini mantarından elde edilmiş doğal boya ile boyanmış örneklerde, en yüksek toplam renk farklılık değerinin, demir (II) klorür mordanının kullanıldığı boyamada elde edildiği görülmüştür. Trumpet mantarından elde edilen doğal boya ile boyanmış ipek örneklerinde; en yüksek toplam renk farklılık değeri, bakır sülfat mordanının kullanıldığı boyamada elde edilmiştir.
In this study, naturally painted chantarelle (Cantharellus Cibarius), porcini (Boletus Edulis) and trumpet (Craterellus Tubaeformis) were used extract products of wild fungi. The fungi of Cantharellus Cibarius, Boletus Edulis and Craterellus Tubaeformis are collected from the Bolu Mengen district, and after washing are dried in the etouve (40°C ± 2°C) for 8 hours. 160% of the material is used as 100% silk thread. The silk wire to be used in painting in the laboratory type painting machine (Thermal) 20 g/l olive oil soap solution is cooked for 1 hour and then the material is dried by making hot and cold washing processes. Before painting, the silk lines are melted with bakery sulfate, potassium aluminum sulfate, potassium dicromate, crane (II) chloride, iron (II) chloride and iron (III) chloride. According to the extract method, the wire was painted in the laboratory painting machine at a boiling temperature of 60 minutes, left to cool within the fleet after 12 hours, the samples were washed in the cold, hot washing, cooked soap and cold washing processes. After the drying process, colour measurements were performed with a spectrum (Datacolor Spectra Flash 600 plus-D65/10°) to create colour coordinates. Painted samples were studied in washing, drilling and lighting. As a result: the Mordan substances have been determined to be effective in changing the total color difference (ΔE*) and the highest total color difference value has been obtained in the painting where the bakersulfate mordan is used. (Dee = 10 2884 ) Clearness - in color assessment according to the shell axis (ΔL*) in other paintings, except the sample brown with potassium bikromate, the color is more bright than the standard. When compared the color strength (K/S) values in the painting of the paintings obtained from chantarelle, porcini and trumpet fungi, the best color output is found in the natural painted silk material obtained from porcini fungi after mording with iron (II) chloride. The color output in all paintings made with iron (III) chloride, potassium dicromate and cylinder chloride is quite low. In samples painted with natural paint obtained from porcine fungi, the highest total color difference value was found in painting where iron (II) chloride marble was used. In the samples of silk painted with natural paint obtained from trumpet mushroom; the highest total color difference value is obtained in the paint where silk sulfate mord is used.
In this study, extraction products of chantarelle (Cantharellus Cibarius), porcini (Boletus Edulis) and trumpet (Craterellus Tubaeformis) wild mushrooms were used as a natural dyes. Cantharellus Cibarius, Boletus Edulis and Craterellus Tubaeformis mushroom species were collected from Bolu Mengen district, washed and then dried in the oven (40oC ± 2oC) for 8 hours. 100% silk treat with 160 denye was used as a material to be dyed. The silk treads to be used in dyeing, were boiled in a laboratory type dyeing machine (Emsey Teknik) by applying 20g/l olive oil soap solution for 60 minutes, and then the material was dried by performing hot and cold water washing processes. Before dyeing, silk treads were mordanted with copper sulphate, potassium aluminum sulphate, potassiun dichromate, tin(II)chloride, iron(II)chloride and iron(III)chloride to see the effects of different mordants. According to the exhaustion method, the silk yarns were were dyed in the laboratory dyeing machine for 60 minutes at boiling temperature (around 98oC), then left to cool in the dyeing liquor, finally followed cold overflow washing, hot washing and cold rinsing additionally. After drying the samples, color measurements were carried out with a spectrophotometer (Datacolor Spectra Flash 600 Plus-D65/10o ) to create color coordinates. Color fastness to washing, rubbing and light of the dyed samples were examined. As a result, it was determined that mordant substances were effective in the change of total color difference ( ΔE) and the highest value was obtained in the dyeing using copper suphate mordant (ΔE 10.2884). In the evaluation of the color according to the lightness-darkness (ΔL) axis, the color was obtained lighter than the standard in other dyeings, except for the sample that was mordanted with potassium dichromate. Comparing the color strength (K/S) values of the dyestuffs obtained from chantarelle, porcini and trumpet mushrooms on the dyed silk, it was observed that the best color yield was obtained in the silk material dyed with natural dye obtained from porcini mushroom after being mordanted with iron (II) chloride. The color yield was very low in the dyeing without mordant and all dyeing with iron (III) chloride, potassium dichromate and tin chloride mordants. In the samples dyed with natural dyes obtained from porcini mushroom, the highest total color difference value was obtained in the dyeing using iron(II)chloride mordant. Silk samples dyed with natural dye obtained from trumpet mushroom, the highest total color difference value achieved in the dyeing using copper suphate mordant.
Alan : Fen Bilimleri ve Matematik; Mühendislik
Dergi Türü : Uluslararası
Makale Detay 
Atıf Yapanlar
Benzer Makaleler
PDF Görüntüle
Dergi Bilgisi
Eseri Dinleyin
Bu Sayfayı Yazdırın
Paylaş
Mendeley
