User Guide
Why can I only view 3 results?
You can also view all results when you are connected from the network of member institutions only. For non-member institutions, we are opening a 1-month free trial version if institution officials apply.
So many results that aren't mine?
References in many bibliographies are sometimes referred to as "Surname, I", so the citations of academics whose Surname and initials are the same may occasionally interfere. This problem is often the case with citation indexes all over the world.
How can I see only citations to my article?
After searching the name of your article, you can see the references to the article you selected as soon as you click on the details section.
  Citation Number 6
 Views 12
Kompozit deniz yapısının dalga kuvvetleri altında incelenmesi
2019
Journal:  
Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi
Author:  
Abstract:

Deniz yapıları tabana sabitlenmiş ya da yüzer şekilde tasarlanabilmektedirler. Günümüzde, yüzer yapıların kullanımı her derinlikte hizmet vermeleri nedeniyle hızla artmaktadır. Bu yapıların yüzmesini tabanda bulunan pontonlar sağlar. Bu çalışmada farklı malzemelerden üretilmiş iki farklı pontonun dalga kuvvetleri etkisinde nümerik analizi yapılmıştır. Yapılardan ilki (Model 1) dışı beton içi köpük olacak şekilde tasarlanmıştır. İkinci yapı ise sadece sert plastik malzeme kullanılarak tasarlanmıştır. Analizlerde Abaqus sonlu elemanlar programı kullanılmıştır. Yapının bulunduğu deniz ortamı ile arasındaki etkileşim çift yönlü akışkan-yapı etkileşim analizleri ile gerçekleştirilmiştir. Çift yönlü etkileşim analizinde Eulerian-Lagrangian yaklaşımlarının birleşimi (CEL) ile modelleme yapılmıştır. Etkileşim modellemesinde diğer modelleme tekniklerinden farklı olarak herhangi bir yüzey tanımlanmamıştır. Etkileşim sadece genel temas özellikleri tanımlanarak gerçekleştirilmiştir. Bu tip modellemede (CEL) sadece Abaqus/Explicit çözücüsü kullanılmaktadır. Deniz ortamı Eulerian, yapı ise Lagrangian yaklaşımı ile modellenmiştir. Deniz ortamının modellemesinde Lineer dalga hız profili kullanılmıştır. Çözüme en uygun nokta ve eleman sayılarının belirlenmesi için hassaslık analizleri yapılmıştır. Hassaslık analizleri modal davranış üzerinden gerçekleştirilmiştir. Nümerik modelin tahkiki dalga su yüzü profilleri üzerinden yapılmıştır. Zamanla değişen su yüzü profilleri iki farklı noktada analitik ve nümerik olarak elde edilmiştir. Analitik ve nümerik dalga profillerininin uyumu sayısal ve görsel olarak tespit edilmiştir. Yapısal analizde ise modal davranışlar, frekanslar ve gerilme dağılımları elde edilmiştir. Çalışmanın sonunda farklı bir akışkan-yapı etkileşim tekniği kullanılması durumunda kullanılacak nokta ve eleman sayıları elde edilmiştir. Bu değerlerin çözüme etkisi süre ve bellek gereksinimi açısından tartışılmıştır.

Keywords:

The study of the composite marine structure under the wave forces
2019
Author:  
Abstract:

The sea structures can be designed fixed on the base or swimming. Today, the use of swimming structures is rapidly increasing due to their service in every depth. These structures allow the pontons on the base to swim. In this study, two different pontons produced from different materials were performed a numerical analysis of the influence of wave forces. The first (Model 1) of the structures is designed to be a non-contained concrete inside dust. The second structure is designed using hard plastic materials. In the analysis, the Abaqus final elements program was used. The interaction between the structure and the sea environment in which it is located is carried out by double-directional fluid-building interaction analysis. The dual-directional interaction analysis has been modeled with the combination of Eulerian-Lagrangian approaches (CEL). In interactive modeling, no surface has been defined, unlike other modeling techniques. Interaction is only carried out by defining general contact characteristics. This type of modeling (CEL) uses only the Abaqus/Explicit solution. The sea environment is Eulerian, and the structure is modeled by the Lagrangian approach. In the modeling of the sea environment, the linear wave speed profile was used. Sensitivity analyses have been performed to determine the most suitable points and the number of elements. Sensitivity analysis is performed through modal behavior. Numeric model's curved wave is made through water face profiles. Water face profiles that change over time have been obtained analytically and numerically at two different points. The conformity of the analytical and numerical wave profiles has been identified numerically and visually. In the structural analysis, modal behaviors, frequencies and distribution of retreat were obtained. At the end of the study, the numbers of points and elements to be used in the event of the use of a different fluid-building interaction technique were obtained. The effect of these values on solving is discussed in terms of time and memory requirement.

Keywords:

0
2019
Author:  
Citation Owners
Attention!
To view citations of publications, you must access Sobiad from a Member University Network. You can contact the Library and Documentation Department for our institution to become a member of Sobiad.
Off-Campus Access
If you are affiliated with a Sobiad Subscriber organization, you can use Login Panel for external access. You can easily sign up and log in with your corporate e-mail address.
Similar Articles










Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi

Field :   Mühendislik

Journal Type :   Ulusal

Metrics
Article : 782
Cite : 1.939
2023 Impact : 0.157
Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi