Özet:

The purpose of the study is to determine the force and the moments (torques) using the inverse dynamic modelling acting on the joints during countermovement (CMJ) and squat jump (SJ) by using link segment modelling. An elite male volleyball player participated in this study (Height = 1.85 m, Weight = 80 kg). One high-speed cameras operating at 500 frames per second were used to record the player’s countermovement and squat jumping (Basler A 602f high speed camera). Captured views were digitized in the SIMI Motion 7.3 (SIMI Reality Motion Systems GmbH-Germany) by tracking 9 anthropometrical markers. Displacement data were filtered with 4th order 8Hz low pass Butterworth filter. Segment’s centre of gravity was computed linear velocity and accelerations.  Angles were calculated and it used to compute angular velocity and accelerations. Joint reaction forces and moments were computed by applying the inverse dynamic analysis into the calculated kinematic values. As result; the height of jump was higher in CMJ than SJ whereas resultant ground reaction force (GRF) was slightly higher in SJ compared to CMJ (SJ: 1749.8 N, CMJ: 1710.3 N). Furthermore, there were two different GRF peaks during CMJ and SJ. These peaks were occurred due to the backward movement of trunk, upper arm, lower arm and head during from descent to ascent. Meanwhile shank and thigh were moving the downward. In other words, it was observed a preparation phase between the descent phase (or stage or state) and ascent phase both jumps (at CMJ and SJ). Calculated moments in the CMJ jumping were higher than the SJ.

Anahtar Kelimeler: