Bu çalışmada, AISI 1030 çeliği bilgisayarlı sayısal denetimli (BSD) torna tezgahında, soğutma sıvısı kullanılmadan, kesme derinliği sabit tutularak (2 mm), değişik kesme hızı ve ilerleme hızı değerlerinde kesme işlemi gerçekleştirilmiştir. AISI 1030 çeliği kaplamasız sementit karbür kesici takımla işlenerek, kesme parametrelerinden kesme hızı ve ilerleme hızı değerinin yüzey pürüzlülüğüne etkisi araştırılmıştır. Deneylerde, 0.25 - 0.45 mm/dev arasında beş farklı ilerleme ve 100, 200 ve 300 m/dak kesme hızı kullanılmıştır. İlerleme değerinin % 80 azaltılmasıyla yüzey pürüzlülüğünde % 215 iyileşme sağlanmış, kesme hızının % 200 azaltılmasıyla ise % yüzey pürüzlülüğünde % 13 iyileşme elde edilmiştir.
In this study, the AISI 1030 steel computer-controlled numeric controlled (BSD) turning factory, without the use of cooling fluid, the cutting depth is fixed (2 mm), the cutting process is carried out at different cutting speed and progress speed values. The AISI 1030 steel is processed with non-covered cement carbon cutting equipment, the impact of the cutting speed and progress speed value on the surface smoothness from the cutting parameters has been studied. In the experiments, five different advances were used between 0.25 and 0.45 mm/dew and the cutting speed of 100, 200 and 300 m/min. With the reduction of the progressive value of 80%, the surface smoothness was improved by 215%, and with the reduction of the cutting rate by 200%, the surface smoothness was improved by 13%.
Alan : Mühendislik
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|