Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 34
 İndirme 3
Modeling of corrosion process of the high-performance concretes in sulfate environment
2016
Dergi:  
Eastern-European Journal of Enterprise Technologies
Yazar:  
Özet:

The main contemporary method for measuring stability of concrete in aggressive environments is to compare the strength of concrete that solidified in an aggressive environment with the strength of concrete that solidified in a non-aggressive environment. This approach to testing has been quite effective in many cases, but it does not allow analysing the impact of corrosion products on the strength of concrete cement matrix. Such data can be obtained after removing corrosion products from the cement matrix of concrete. The techniques applied in the study involved removal of corrosion products while subjecting the samples to aggressive environments, which helped determine that a cement skeleton of concrete with an integrated active mineral additive (a mixture of acidic ash removal of metakaolin in optimal quantities) has greater strength and corrosion resistance than a cement skeleton of concrete without a complex active mineral additive. A combination of physical and chemical methods of research – such as phase-contrast X-ray imaging, thermal, and electron microscopy – showed that a complex active mineral additive produces cement structure peculiarities. Thus, it has been determined that frames with a complex active mineral additive can form dense structures with a significant number of low-base calcium silicate hydrates and solid solutions of hydrated aluminium silicate composition (hydrated galena – hydrated anorthite). This is quite different from structures without the complex active mineral additive, which are characterized in an aggressive environment (for example, in a solution of sulphuric acid) by leaching of soluble compounds such as portlandite; moreover, this process is intensified by smoothing the sample surface. These peculiarities of forming cement matrix structure explain the high corrosion resistance of concretes. The obtained data are important for developing a composition of concretes for reinforced concrete structures that are used in aggressive environments. Author Biographies Leonid Sheinich, State Enterprise “The State Research Institute of Building Construction” Minregion Ukraine 5/2 Preobragenska str., Kyiv, Ukraine, 03037 Doctor of sciences, Professor Department of reinforced concrete structure manufacturing technology

Anahtar Kelimeler:

Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler












Eastern-European Journal of Enterprise Technologies

Alan :   Fen Bilimleri ve Matematik

Dergi Türü :   Uluslararası

Metrikler
Makale : 4.764
Atıf : 4.485
2023 Impact/Etki : 0.294
Eastern-European Journal of Enterprise Technologies