Bu çalışma kapsamında Kırşehir bölgesi Bozçaldağ formasyonu içerisinde dört farklı bölgeden temin edilen mermerlerin agrega olarak kullanılabilirliği incelenmiştir. Temin edilen agrega örneklerinin öncelikle kimyasal analizleri gerçekleşirilerek kimyasal bileşimleri tespit edilmiştir. Daha sonra agregaların özgül ağırlık, birim hacim ağırlık, porozite, ağırlıkça ve hacimce su emme deneyleri gereçekleştirilerek fiziksel özellikleri belirlenmiştir. Karbonat kökenli 4 farklı agrega ocağından temin edilen agregalardan aynı şartlar ve aynı karışım oranlarında beton üretilmiş olup beton karot örneklerinin mühendislik özellikleri (Birim hacim ağırlık, ultra ses, tek eksenli basınç dayanımı, yarmada çekme dayanımı, Schmidt sertlik) incelenmiştir. Elde edilen veriler sonucunda 4 farklı bölgeden temin edilen karbonat kökenli agrega özelliklerinin beton fiziksel ve mekanik özelliklerine etkileri yorumlanmıştır. Çalışmada bölgesindeki agregaların aynı formasyondan temin edilmesine rağmen farklı fiziksel ve jeokimyasal özelliklere sahip olduğu belirlenmiştir. Bu nedenle beton üretiminde istenen standardizasyonun sağlanması açısından ocaktan agrega üretimi sonrasında belirli periyotlar halinde agrega özelliklerinin ilgili standartlar çerçevesinde belirlenmesi önem arz etmektedir.
In the framework of this study, the availability of marble supplied from four different areas in the formation of Bozçaldağ in the Kırşehir region has been studied as an agrega. The alleged aggregate samples were first identified by chemical analysis. The physical characteristics of the aggregates were then determined by carrying out the specific weight, unit volume weight, porosity, weight and volume water absorption experiments. The same conditions and the same mix rate of concrete are produced from the aggregates provided from 4 different aggregates of carbonate origin and the engineering characteristics of concrete caroths are studied (Burning volume weight, ultra sound, one-axis pressure resistance, drawing resistance, Schmidt hardness). The results of the obtained data have interpreted the effects of carbonate-based aggregate properties supplied from 4 different areas on the physical and mechanical properties of concrete. The study found that the aggregates in the area were provided with the same formation and had different physical and geochemical properties. Therefore, it is important for the standardization required in concrete production to be achieved after the agrega production in certain periods to determine the agrega characteristics in the framework of the relevant standards.
Alan : Mühendislik
Dergi Türü : Uluslararası
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|