User Guide
Why can I only view 3 results?
You can also view all results when you are connected from the network of member institutions only. For non-member institutions, we are opening a 1-month free trial version if institution officials apply.
So many results that aren't mine?
References in many bibliographies are sometimes referred to as "Surname, I", so the citations of academics whose Surname and initials are the same may occasionally interfere. This problem is often the case with citation indexes all over the world.
How can I see only citations to my article?
After searching the name of your article, you can see the references to the article you selected as soon as you click on the details section.
 Views 14
 Downloands 1
Helium Porosity Development During Annealing of Helium-Implanted 18Cr10NiTi Steel
2018
Journal:  
East European Journal of Physics
Author:  
Abstract:

The kinetics of helium porosity development during annealing of 18Cr10NiTi stainless steel irradiated with 20 keV helium ions at room temperature for simultaneous creation of displacement damage at a level of 0.5–5 dpa and a helium concentration of 1–12 at.%, have been investigated by electron microscopy and thermal desorption spectrometry. The temperature ranges of helium release from steel and their dependence on the irradiation dose are determined. The evolution of 18Cr10NiTi steel microstructure was investigated during post-implantation annealing in the temperature range from Troom to 1420 K. At a dose of 1·1020 m-2, helium bubbles were detected only after annealing to a temperature of 890 K, while at a dose of 1·1021 m-2, bubbles were observed immediately after radiation at Troom. During annealing, the average diameters of the bubbles vary from ~1 nm at Troom to 10–20 nm at Tann 1420 K. The mechanisms of bubbles growth either by migration and coalescence, or by Ostwald ripening – dissolution and re-trapping are considered. Since each of these mechanisms corresponds to a certain trend of bubbles size and density dependence on the annealing temperature, the temperature dependences of average diameters and densities of helium bubbles for a dose of 1·1021 m-2 have been constructed and analyzed. Experimental data are characterized by three temperature ranges: 1 – from 300 to 760 K, 2 – from 760 to 1030 K, and 3 – from 1030 to 1350 K with clearly differing trends. In the low-temperature region the diameter and density of the bubbles virtually does not change. Their size increases and the density decreases at annealing in the temperature range 760-1030 K. This tendency intensifies in the temperature range of 1030-1420 K. An estimation of activation energy of the processes controlling the mechanism of bubble growth in the temperature range of 1000-1420 K has been done. An obtained value of ~3.7 eV correlates well with the theoretically calculated value of the activation energy of the dissociation process (EHediss) of the Ostwald ripening mechanism.

Keywords:

Citation Owners
Information: There is no ciation to this publication.
Similar Articles












East European Journal of Physics

Field :   Fen Bilimleri ve Matematik

Journal Type :   Uluslararası

Metrics
Article : 731
Cite : 77
2023 Impact : 0.115
East European Journal of Physics