Özet:

: An anode for solid oxide fuel cells (SOFCs) was fabricated using 3D inkjet printing and layer-by-layer laser treatment of compositions based on the NiO/YSZ system followed by thermal sintering. The samples were characterized by scanning electron microscopy and X-ray phase analysis. The study of the morphology of the as-prepared samples revealed the presence of both interlayer macroporosity and intralayer microporosity, which depends on the laser exposure during laser treatment. The use of graphite directly added to the printing composition as the pore former increased the intralayer porosity. The morphology and size of the pores were shown to be similar to those of the pore former. The microstructure and porosity of the anode support can be controlled by varying the laser exposure values and the graphite content of the ceramic composite, which in turn opens up great prospects for using these paste compositions and printing techniques for the manufacture of SOFC anode supports.

Anahtar Kelimeler: