Abstract:

This study was conducted to address the critical issue of the poor safety management system in laboratories, through the design of a smart laboratory management facility based on the Internet of Things (IoT). In this design, three major safety parameters-fire, temperature and carbon (ii) oxide (CO) levels were monitored by appropriate sensors, which transmit data to the microcontroller (Arduino) for interpretation. The Arduino microprocessor processed the data received from the sensor(s), makes decisions based on the predefined algorithms. Based on the decisions made by the Arduino, the microprocessor sends instructions to a relay module triggered the necessary actions to be taken by the output hardware devices-fire extinguisher, air conditioning system and exhaust fan unit. The temperature monitoring system was designed at an operational range of 18°C to 25°C, the CO control unit was designed to maintain the CO concentration inside the laboratory at a level not exceeding 4 parts per million (ppm), as approved by the World Health Organization; while fire control unit was designed to detect the presence of smoke of naked fire inside the building. In the event that any of these parameters breach safety thresholds, the smart structure's safety system will trigger the appropriate responses. The designed structure was built in compliance with international safety standards. Results obtained through the testing and evaluation of the system revealed that the smart system had overall performance efficiency of 91% and false output of 9%. The system's failure rate of 9% can be reduced by employing advanced sensors and adjusting the delay rate. The findings of this study revealed that IoT and automation can successfully monitor and protect the working environment inside laboratories.

Keywords: