GİRİŞ ve AMAÇ: Bu çalışmanın amacı iki farklı döner eğe sisteminin, orijinal kök kanal eğimi üzerindeki etkilerinin üç farklı kök kanal eğimi ölçüm tekniği ile karşılaştırılarak incelenmesidir. YÖNTEM ve GEREÇLER: Otuz adet çekilmiş alt çene birinci ve ikinci büyük azı dişinin meziyobukkal kanalları Mtwo veya ProTaper ile şekillendirilmek üzere eşit olarak iki gruba ayrılmıştır. Dişler şeffaf akrilik rezin içine gömüldükten sonra pre-operatif radyografileri çekilmiştir. Her iki döner eğe sisteminin eğeleri üretici firma talimatları doğrultusunda kullanılmıştır. Meziyobukkal kanalların başlangıç ve işlem sonrası açısal ve doğrusal değerleri AutoCAD R12 programı kullanılarak radyografiler üzerinden hesaplanmıştır. BULGULAR: Her iki grupta da genişletme sonrası kanal giriş açıları (CAA) ve Scheider açıları (SA) anlamlı derecede azalmıştır (p≤ 0.005). Genişletme sonrası AC uzunluğu (kanal girişi ile kanalın uzun aksından ayrılmaya başladığı nokta arası mesafe) sadece ProTaper gurubunda belirgin olarak artmıştır (p=0.005). TARTIŞMA ve SONUÇ: Mtwo grubunda AC uzunluğunda değişiklik olmaması kanalın orjinal eğimini koruduğunu göstermektedir. Kök kanal şekillendirilmesi sonrası kanal eğimlerindeki değişikliklerin ölçülmesinde CAA ve SA açılarının yanısıra işlem sonrası AC uzunluğu da ölçülmelidir.
The aim of this study is to study the effects of two different rotating curve systems on the original root channel curve by comparing with three different root channel curve measurement techniques. Method and Requirements: Thirty pieces of the drawn undercheck are equally divided into two groups to be formed by Mtwo or ProTaper, the meshiobucal channels of the first and second large small teeth. The teeth were taken pre-operative radiographs after being buried in a transparent acrylic resin. Both curves of the rotating curve system are used according to the manufacturer's company's instructions. The angle and linear values of the start and post-processing channels are calculated through radiographs using the AutoCAD R12 program. FUNDATIONS: In both groups, the post-extension channel entrance angles (CAA) and the Scheider angles (SA) have significantly decreased (p≤ 0.005). The post-extension AC length (the distance between the point with the channel entrance and the long edge of the channel) only increased significantly in the ProTaper group (p=0.005). NOTHING AND RESULT: The absence of changes in the AC length in the Mtwo group indicates that it retains the original curve of the channel. To measure the changes in the canal curves after the root channel formation, the CAA and SA angles, as well as the AC length after the processing, should be measured.
Alan : Sağlık Bilimleri
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|