Bu çalışmada, dikdörtgen kesitli bir kanalın içerisinde, akışa dik olarak yerleştirilmiş ve ısıtılmış silindir üzerinden olan ısı transferi sayısal olarak incelenmiştir. Akışı idare eden Navier-Stokes denklemlerinin çözümünde Sonlu Hacim Metodunu (SHM) kullanan ANSYS-FLUENT 14 paket programı kullanılmıştır. Çalışmada, üç farklı türbülans modeli (Std. k-ε, RNG k-ε ve Realizable k-ε) ile dört farklı giriş Reynolds sayısı (Re= 4000, 8000, 16000 ve 32000) için hesaplamalar yapılmıştır. Sonuç olarak, Std. ve RNG k-ε türbülans modelleri ile elde edilen sayısal sonuçların deneysel değerlerle iyi uyum gösterdiği tespit edilmiştir. Ayrıca beklenildiği üzere artan Reynolds sayısı ile silindir üzerindeki hemen hemen tüm noktalarda Nusselt sayısı arttırmıştır.
In this study, the heat transfer, which is placed straight into the flow and over the heated cylinder, was numerically studied within a straight-cutting channel. The ANSYS-FLUENT 14 package program has been used using the Final Volume Method (SHM) to solve the flow-managing Navier-Stokes equations. In the study, three different turbulence models (Std. k-ε, RNG k-ε and Realizable k-ε) have been calculated for four different input Reynolds numbers (Re= 4000, 8000, 16000 and 32000). As a result, St. and the numerical results obtained by the RNG k-ε turbulence models have been found to be well compatible with the experimental values. The number of Reynolds, as expected, has also increased the number of Nusselt at almost all points on the cylinder.
Alan : Mühendislik
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|