Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 20
 İndirme 4
Development of a resource-saving technology for the treatment of ferrum-containing wastewater from etching operations
2022
Dergi:  
Eastern-European Journal of Enterprise Technologies
Yazar:  
Özet:

The object of this study is wastewater from chloride and sulfate etching operations. This paper reports results of research on ways to reduce the consumption of chemical reagents in wastewater treatment systems from etching operations. Spent etching solutions are subject to regeneration with return to the production process and partial dosing to the main stream of wastewater. It was found that at a ferrum concentration of 30 g/l in etching solutions, the solution must be treated with an alkaline reagent (10–20 % NaOH) to pH=3.5–4.0 in order to return to the technological process. In this case, the final concentration of ferrum is 11 g/l. The use of hydrogen peroxide (20–40 % H2O2) together with the alkaline reagent makes it possible to increase the degree of extraction by 30 %, that is, the final concentration of ferrum is 8 g/l. When discharging 1 m3 of etching solutions, 0.5 m3 is subject to regeneration and, after mixing with 0.5 m3 of the commercial reagent (HCl) it returns to the technological process. Commercial acid consumption is reduced by 50 %. It was shown that the use of individual flows of waste solutions as a chemical reagent reduces the cost of reagents for their neutralization (saving alkaline reagent is 80 %). Thus, 1.2 kg/m3 of a commercially available reagent (NaOH) is consumed per 1 m3 of solutions (etching and degreasing) after mixing them, and, without mutual neutralization, this consumption is 6 kg/m3. To neutralize etching solutions, it is recommended to carry out the process in the range of pH=6.5–7.5. For a solution in which Fe3+ ions predominate with an initial concentration of 0.53 mol/L, a degree of extraction of 0.9 is achieved, and the total consumption of the reagent (7.1 mol/l) exceeds the stoichiometric one by only 10 %. Deep purification from ferrum-containing impurities using a magnetic device expands the possibilities of practical implementation of further desalting with inverse osmosis. Author Biographies Mykola Yatskov, National University of Water and Environmental Engineering; Rivne Technical Professional College of National University of Water and Environmental Engineering PhD, Senior Researcher, Professor Department of Chemistry and Physics Director

Anahtar Kelimeler:

Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler












Eastern-European Journal of Enterprise Technologies

Alan :   Fen Bilimleri ve Matematik

Dergi Türü :   Uluslararası

Metrikler
Makale : 4.764
Atıf : 4.485
2023 Impact/Etki : 0.294
Eastern-European Journal of Enterprise Technologies