Bu çalışmada; betonun mekanik özelliklerinden olan basınç, eğilmede çekme ve yarmada çekme dayanımlarının çarpma dayanımı üzerindeki etkileri incelenmiştir. Bu amaç doğrultusunda maksimum agrega çapı 4, 8 ve 16 mm, su/çimento (S/Ç) oranı ise 0.50 ve 0.55 olan altı seri numuneleri hazırlanmıştır. Hazırlanan numuneler üzerinde basınç, eğilme, yarma ve Charpy darbe dayanımları belirlenmiştir. Yapılan deneysel çalışmalar sonucunda; betonun mekanik özelliklerini agrega çapındaki artış olumlu etkilerken S/Ç oranındaki artış olumsuz yönde etkilemiştir. Betonun çarpma dayanımındaki değişim de aynı şekilde olmuştur. Fakat çarpma dayanımı S/Ç oranındaki artıştan daha az etkilenmiştir.
In this study, impact stregth of concrete is investigated with the effect of mechanical properties such as compressive strength, flexural tensile strength and splitting tensile strength. For this purpose, six serial specimens with three different maximum aggregate diameter (4, 8 and 16 mm) and whose water/cement (w/c) ratio of 0.50 to 0.55 were prepared. The compressive, bending, splitting and impact strength of the prepared specimens were determined. As a result of study The mechanical properties of the concrete were positively effected by the increase in the aggregate size, while the icrease in the W/C ratio adversely effected. The change in the impact strength of concrete has also been the same. But the impact strength is less effected than the increase in W/C ratio.
Alan : Fen Bilimleri ve Matematik; Mimarlık, Planlama ve Tasarım; Mühendislik; Ziraat, Orman ve Su Ürünleri
Dergi Türü : Uluslararası
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|