This paper presents comparative assessment of operation quality of drive shaft lines for the same type of seagoing vessels used on the same basin. The assessment has been made on the basis of vibration analysis. The considered objects differ from each other in terms of operation range and time. 3 ships with two shafts of lines each, have been studied. Measurements were taken in 6 measuring points: for 4 engine rotational speeds: 850, 1100, 1300 and 1500. A macro has been developed to be used for division of files into axes and time histories, each including 1024 separate measurements for each point, for every direction, each rotational speed and usable and unusable shaft lines. A correlation characteristic of time histories – normalized value of correlation function for signals suitable and unsuitable in reference to a randomly selected suitable signal, has been calculated for each combination. A characteristic of concentrated type has been accepted for standard deviation lower than 15 % of the average. A module and the sum of standard deviations have been calculated from the difference of mean values of usable and unusable for use objects, for each combination of particular characteristics. It has been assumed that the characteristic is reliable if the module of mean values difference is higher than the sum of standard deviations. Since the concentration of value for normalized correlation function of signals for usable and unusable for use units is relatively high it has been assumed that this characteristic can be worked out so as to provide reliable data to be used for assessment of their operation quality in the analyzed period of time.
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|