Bu çalışmada Alüminyum 6082 alaşımının dalma erozyon tezgahında pirinç elektrot ile işlenebilirliği incelenmiştir. Deneysel çalışmada Taguchi L9 dikey dizin deney seti kullanılmıştır. İşleme parametresi olarak boşalım akımı, vurum süresi ve bekleme süreleri kullanılmıştır. İşlenebilirlik deneyleri sonucunda ortalama yüzey pürüzlülüğü, iş parçası işleme hızı ve elektrot aşınma hızı değerleri incelenmiştir. Taguchi tekniği kullanılarak ideal kesme şartları için kontrol faktörleri belirlenmiştir. Kontrol faktörlerinin sonuçlara etkisi varyans analizi yardımıyla bulunmuştur. Deneysel çalışma sonucunda ortalama yüzey pürüzlülüğü, iş parçası işleme hızı, elektrot aşınma hızı üzerinde en etkili parametrenin boşalım akımı olduğu belirlenmiştir. Artan boşalım akım değerinin, ortalama yüzey pürüzlülüğünü olumsuz yönde etkilediği ve elektrotun daha fazla aşınmasına neden olduğu bulunmuştur. Vurum süresinin ve bekleme süresinin ortalama yüzey pürüzlülüğü üzerinde önem seviyesinin olmadığı belirlenmiştir.
In this study, the processability of aluminum 6082 alloy with rice electrots was studied in the immersive erosion factory. In the experimental study, the Taguchi L9 vertical directory experiment set was used. As a processing parameter, the empty flow, shock time and waiting times have been used. Processability experiments have studied average surface smoothness, work piece processing speed and electrode stretching speed values. The Taguchi technique has determined control factors for the ideal cutting conditions. The impact of control factors on the results was found with the help of variance analysis. Experimental studies have determined that the average surface smoothness, the processing speed of the work piece, the most effective parameter on the electrotic stretching speed, is the empty flow. It has been found that the increased empty current value affects the average surface smoothness in a negative direction and causes the electrots to become more exhausted. It has been determined that the time of shooting and the waiting time have no level of importance over the average surface smoothness.
Journal Type : Ulusal
Relevant Articles | Author | # |
---|
Article | Author | # |
---|