Bu çalışmada Ege Bölgesindeki sekiz il(Manisa, İzmir, Kütahya, Uşak, Afyon, Aydın, Denizli, Muğla) için belirlenen optimum hava tabakası kalınlığı hesaplanmıştır. Hesaplanan optimum hava tabakası baz alınarak düşey konumda iki cam plaka arasına 1’er mm kalınlığında pleksiglass şeffaf malzeme konularak iki tabaka, üç tabaka, dört tabaka optimum hava boşluğu oluşturarak pencerelerdeki ısı kaybı araştırılmıştır.Araştırma sonuçlarına göre; Muğla ili için iki cam plaka arasına optimum hava tabakası konulduğunda toplam ısı transfer katsayısı 1.19 , ısı transferi 16.48 , iki cam plaka arasına 1 mm şeffaf pleksiglassla iki tabaka optimum hava kalınlığı oluşturulduğunda toplam ısı transfer katsayısı 0.72, ısı transferi 9.97, üç tabaka optimum hava tabakası oluşturulduğunda toplam ısı transfer katsayısı 0.51 ,, ısı transferi 7.11, dört tabaka optimum hava tabakası oluşturulduğunda toplam ısı transfer katsayısı 0.4, ısı transferi 5.53 olarak bulunmuştur. İki cam plaka arasında iki tabaka hava katmanı olması durumunda %38-40’ lık bir enerji tasarrufu, üç tabaka hava katmanı olması durumunda %56-58’lik bir enerji tasarrufu ve dört tabaka hava katmanı olması durumunda ise %65-67’ ye varan bir enerji tasarrufu olduğu bulunmuştur.
In this study, the optimum air layer thickness determined for eight provinces in the Egean region (Manisa, İzmir, Kütahya, Uşak, Afyon, Aydın, Denizli, Muğla) was calculated. Based on the calculated optimum air layer, the heat loss in the windows is studied by creating the optimum air gap in two layers, three layers, four layers, with a thickness of 1 mm between two glass plates and a thickness of 1 mm between two glass plates and a thickness of 1 mm between two glass plates and a thickness of 1 mm between two glass plates and a thickness of 1 mm between two glass plates and a thickness of 1 mm between two glass plates and a thickness of 1 mm between two glass plates and a thickness of 1 mm between two glass plates and a thickness of 1 mm between two glass plates and a thickness of 1 mm between two glass plates and a thickness of 1 mm between two glass plates and a thickness of 1 mm between two glass plates and a thickness of 1 mm between two glass plates. 97, the total heat transfer rate when the three layers optimum air layer was created was 0.51 ,, heat transfer 7.11, the total heat transfer rate when the four layers optimum air layer was created was 0.4, heat transfer 5.53. If there are two layers of air between two glass plates, there is an energy saving of 38-40%, if there are three layers of air, 56-58%, and if there are four layers of air, there is an energy saving of up to 65-67%.
Alan : Fen Bilimleri ve Matematik
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|