Abstract:

Designing of a solar heating system involves appropriate sizing of different components based on predicted solar insolation and heating load demand. But, it is a complex problem due to unpredictable weather data components. A number of design methods are available for solar heating systems. In this paper, f-chart method has been used due to its simplified design procedure, analysis and low cost in selecting the sizes and type of solar collectors and in estimating the annual thermal performance of solar heating system. Using this method, the design of liquid solar heating system and the estimation of the fraction of total heating load (domestic water and space heating load) that will be supplied by solar energy for a family of six in Riyadh have been conducted. The study includes the effect of different collector areas and storage capacity per square meter of collector area and collector tilt angle on fraction of the load supplied by solar energy. It has been found that increasing the collector area results in an increasing of annual load fraction supplied by solar energy. It has also been seen that increasing the specific storage capacity results in small increase in solar load fraction and the effect is more visible during the summer than during the winter. The result of the study reveals that collector configurations with lower tilt angles are better during the summer and higher values of angles are better during the winter. The optimal annual collector configuration tilt angle which gives the maximum solar load fraction has been found to be 30o

Keywords: