Kuvarsın kimyasal yöntemlerle saflaştırılması, optik cam ve elektronik sanayinde ve ileri teknoloji ürünlerinde kullanımı açısından son derece önemlidir. Organik ve inorganik asitlerin kullanıldığı kimyasal yöntemlerle, kuvars cevherlerindeki en önemli safsızlık olan demiri büyük ölçüde uzaklaştırmak mümkündür. Bu çalışmada kuvars cevherinde safsızlık olarak bulunan demirin uzaklaştırılması amacıyla hidrojen peroksit varlığında sülfürik asit ve sitrik asit liçi testleri gerçekleştirilmiştir. Kimyasal liç testlerinde farklı asitlerin performansı ve katı/sıvı oranı, sıcaklık, liç süresi ve reaktif derişimi gibi parametrelerin Fe2 O3 uzaklaştırma verimine etkisi tam faktöriyel deney tasarımı yöntemine göre belirlenmiş, elde edilen sonuçlar ANOVA (varyans analizi) yöntemi ile değerlendirilmiş ve ampirik modeller oluşturulmuştur. Belirlenen optimum şartlarda (katı/sıvı oranı: %5, sülfürik asit derişimi: 3M, hidrojen peroksit derişimi: 1M, sıcaklık: 90°C, liç süresi: 120 dk) hidrojen peroksit varlığında sülfürik asit liçinde %98,9 Fe2 O3 uzaklaştırma verimi ve 1 ppm Fe2 O3 içerikli yüksek kalitede kuvars ürünü elde edilmiştir. Anahtar Sözcükler: Kuvars, Saflaştırma, Asit Liçi, İndirgeyici, Fe2 O3 Uzaklaştırma. Purification of quartz with chemical processes is extremely important for many industries including optical quality glass, electronic and advanced technological products. Iron as the most significant impurity present in quartz ores can be substantially removed by aqueous chemical processes using organic and inorganic acids. In this study to investigate the removal of iron as impurity from quartz ores, sulfuric acid and citric acid leaching tests with hydrogen peroxide were conducted. Chemical leaching tests were performed to evaluate the performances of different acids and effects of the parameters including pulp density, temperature, leaching duration and reagent concentration on Fe2 O3 removal using full factorial design method. The results were evaluated by ANOVA (analysis of variance) method and empirical regression models were established. Under optimum condition (5% pulp ratio, 3M sulfuric acid concentration, 1M hydrogen peroxide concentration, 90°C temperature and 120 minutes of leaching (reaction) time), a Fe2 O3 removal of 98,9% and 1 ppm Fe2 O3 content high quality quartz product were obtained when sulphuric acid leaching in the presence of hydrogen peroxide was tested. Keywords: Quartz, Purification, Acid Leaching, Reductant, Fe2 O3 Removal
Alan : Mühendislik
Dergi Türü : Uluslararası
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|