Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 ASOS INDEKS
 Görüntüleme 9
Design of Fast Charging Station with Energy Management for eBuses
2021
Dergi:  
Vehicles
Yazar:  
Özet:

The popularity of the eBus has been increasing rapidly in recent years due to its low greenhouse gases (GHG) emissions and its low dependence on fossil fuels. This incremental use of the eBus increases the burden to the power grid for its charging. Charging eBus requires a high amount of power for a feasible amount of time. Therefore, developing a fast-charging station (FCS) integrated with Micro Energy Grid (MEG) and hybrid energy storage is crucial for charging eBuses. This paper presents a design of FCS for eBus that integrates MEG with hybrid energy storage with the energy management system. To reduce the dependency on the main utility grid, a hybrid micro energy grid based on a renewable source (i.e., PV) have been included. In addition, hybrid energy storage of batteries and flywheels has also been developed to mitigate the power demand of the fast-charging station during peak time. Furthermore, a multiple-input DC-DC converter has been developed for managing the DC power transfer between the common DC bus and the multiple energy sources. Finally, an energy management system and the controller has been designed to achieve an extensive performance from the fast charging station. MATLAB Simulink has been used for the simulation work of the overall design. Different test case scenarios are tested for evaluating the performance parameters of the proposed FCS and also for evaluating its performance.

Anahtar Kelimeler:

Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler












Vehicles

Dergi Türü :   Uluslararası

Metrikler
Makale : 6
Vehicles