Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 11
 İndirme 1
Development Of Technology For Producing Thermally Strengthened Reinforcement Rolled
2021
Dergi:  
Turkish Journal of Computer and Mathematics Education
Yazar:  
Özet:

The article discusses the results of research on the development of the chemical composition and mechanical properties of reinforcement No. 12 made of steel grade 22C, as well as the development of a technology for obtaining thermomechanically hardened coiled rebar. It is shown that the proposed profile provides better hardenability of the rolled section and increases the efficiency of water cooling. The best results in terms of mechanical properties were obtained for rolled products made of steel grade 460B. A method of hot rolling of steel and a method of production of reinforcing bars of increased strength are proposed, one of the important components of which is microalloyed vanadium in the range of 0.04-0.10%, which will ensure an increase in the strength level up to 30%. The results of mechanical tests of coiled reinforcing bars and comparative data on the mechanical properties of reinforcement No. 12 rolled on mill 320 are also presented. It is shown that the use of steel microalloyed with vanadium makes it possible to obtain reinforcing bars with an effective profile with a nominal diameter of 5.5—8.0 mm, class A500C, in a temperature range acceptable for the equipment of mill 150.

Anahtar Kelimeler:

0
2021
Yazar:  
Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler












Turkish Journal of Computer and Mathematics Education

Dergi Türü :   Uluslararası

Metrikler
Makale : 1.706
Atıf : 106
2023 Impact/Etki : 0.071
Turkish Journal of Computer and Mathematics Education