Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 20
Development of a virtual hardware temperature observer for frequency-controlled asynchronous electric motors
2023
Dergi:  
Eastern-European Journal of Enterprise Technologies
Yazar:  
Özet:

One of the most common types of AC electric machines are asynchronous electric motors. Because of their simple and reliable design, they are used in many industries. In this paper, the object of research is an asynchronous electric motor with a short-circuited rotor. To ensure the normal operation of an asynchronous electric motor, the heating temperature of its active parts should not exceed the maximum permissible values, which are determined by the corresponding class of heat resistance of the insulation system used in the electric motor. In asynchronous electric motors, the stator winding is the most thermally vulnerable node, which is the first to fail when the temperature of the electric motor increases. Thermal protection devices protect an asynchronous electric motor from emergency operating modes accompanied by an unacceptable excess of the temperature of their windings. In order to build an indirect system of protection against overheating of the stator windings, a temperature observer has been developed using already available signals in a frequency-controlled electric drive. Simulation studies were performed in Matlab/Simulink application software packages. Simulation studies were carried out on the basis of asynchronous electric motors of the 4A series with a capacity of 30, 75 and 110 kW in the temperature range from 20 °C to 250 °C. As a result of the research, it was found that the error of indirect calculation of the temperature of electric motors, taking into account the correction factor, does not exceed 1 %. The proposed temperature observer can be used to build protections for asynchronous electric drives Supporting Agency We would like to express our great gratitude to the Doctor of Technical Sciences, Professor Boris Nikolaevich Yashin and Doctor of Technical Sciences Irina Yuryevna Semykina for making a great contribution to the research and development of thermal protection systems of an asynchronous electric motor Author Biographies Gulim Nurmaganbetova, Saken Seifullin Kazakh Agrotechnical Research University PhD, Senior Lecturer Department of Energy

Anahtar Kelimeler:

Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler












Eastern-European Journal of Enterprise Technologies

Alan :   Fen Bilimleri ve Matematik

Dergi Türü :   Uluslararası

Metrikler
Makale : 4.764
Atıf : 4.485
2023 Impact/Etki : 0.294
Eastern-European Journal of Enterprise Technologies