Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 ASOS INDEKS
 Görüntüleme 5
Impact of selected sources of transport vibrations on the perception of vibrations by people in buildings
2019
Dergi:  
Vibroengineering Procedia
Yazar:  
Özet:

Vibrations propagating through the soil into the building can not only be harmful to the building structure or cause its accelerated wear, but can also effect on the vibrational comfort in the rooms. They can also be annoying for residents and building users, and in extreme cases can lead to sleep disorders, headaches and neurotic conditions. Especially vibrations from the low frequency range from 5 to 25 Hz are undesirable, because there are resonance frequencies of human internal organs in this frequency range. The human perception of vibrations in buildings, despite many researches made in the past, despite standards and requirements in this area, is still a topic not fully understood mainly due to the subjective nature of the perception of vibrations by various people. It is widely known that the type of transport vibration source has an impact on human perception. Vibrations generated by above-ground sources are more felt on the upper floors as opposed to vibrations generated from the underground. In this paper three types of transport vibrations are analyzed on one chosen building located in Warsaw. Human perception of vibration is evaluated according to two methods: root mean squared (RMS) and vibration dose value (VDV).

Anahtar Kelimeler:

Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler












Vibroengineering Procedia

Dergi Türü :   Uluslararası

Vibroengineering Procedia