Bu çalışmada havalı fren kompresör silindir kafası üretiminde kullanılan aynı kimyasal bileşime sahip fakat farklı morfolojide iki farklı AlSi12 alaşımının aşınma dirençleri incelenmiştir. Yüksek basınçlı döküm yöntemiyle üretilmiş ürünler abrasif aşınmaya maruz bırakılmıştır. Aşınma deneyleri, kuvvet kontrollü test cihazında 600 mesh SiC zımpara, 10, 20 ve 30N yükleri altında 300 rpm dönme hızında yapılmıştır. Abrasif aşınma test sonuçlarına göre, küresel dendritlere sahip alaşımın aşınma davranışının daha iyi olduğu sonucu ortaya çıkmıştır.
In this study, the air brake compressor has the same chemical compound used in the production of the silinder head, but in different morphology two different AlSi12 alloys have been studied resistance to stretching. Products produced by high-pressure thinning method are exposed to abrasive thinning. Stretching experiments were performed at a power-controlled test device with 600 mesh SiC slurry, 300 rpm rotation speed under 10, 20 and 30N loads. According to the results of the abrasive stretching test, the result was that the alloy with global dendrites had a better stretching behavior.
Alan : Fen Bilimleri ve Matematik
Dergi Türü : Ulusal
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|