Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
  Atıf Sayısı 2
 Görüntüleme 28
 İndirme 1
Effects of under body diffuser on the aerodynamics of a generic car
2018
Dergi:  
International Journal of Automotive Engineering and Technologies
Yazar:  
Özet:

Flow structure and other aerodynamic properties such as drag and lift coefficients of one of the extensively investigated generic cars so-called Ahmed body are reported in the present numerical study for the fixed ground and upswept rear. For this purpose, Ahmed body with the slant angle of 25 degrees is considered and its rear bottom edge is upswept with various angles from 5 degrees to 30 degrees by 5-degree increments without any side plates. It is observed that the sizes of the upper and lower recirculation bubbles seen in the profile section are decreased compared with the classical Ahmed body, however, the existence of some additional recirculation bubbles are observed when the upswept angle increases. At the highest upswept angle, the upper and bottom vortices called counter-rotating vortices (CVP) become nearly symmetric in the near-far region however they merge and only one CVP forms behind the body in the far-field. Effects of the upswept angles on the drag and lift coefficients reveal that drag coefficient reduces the upswept angle to 15 degrees and then rises to 20 degrees while the lift coefficient increases after 25 degrees.

Anahtar Kelimeler:

Atıf Yapanlar
Dikkat!
Yayınların atıflarını görmek için Sobiad'a Üye Bir Üniversite Ağından erişim sağlamalısınız. Kurumuzun Sobiad'a üye olması için Kütüphane ve Dokümantasyon Daire Başkanlığı ile iletişim kurabilirsiniz.
Kampüs Dışı Erişim
Eğer Sobiad Abonesi bir kuruma bağlıysanız kurum dışı erişim için Giriş Yap Panelini kullanabilirsiniz. Kurumsal E-Mail adresiniz ile kolayca üye olup giriş yapabilirsiniz.
Benzer Makaleler








International Journal of Automotive Engineering and Technologies

Alan :   Mühendislik

Dergi Türü :   Uluslararası

Metrikler
Makale : 220
Atıf : 129
2023 Impact/Etki : 0.108
Quarter
Mühendislik Temel Alanı
Q3
61/114

International Journal of Automotive Engineering and Technologies