Bu çalışmada AlB2 takviyeli metal matrisli kompozitlerin farklı test koşulları altında abrasif aşınma davranışlarının incelenmesi amaçlanmıştır. Üretilen kompozit malzemelere aşınma testleri uygulanırken Taguchi deneysel yönteminden faydalanılmıştır. Aşınma testleri için matris tipi, takviye oranı, aşındırıcı zımpara tipi, yük ve kayma hızı faktörleri ele alınmış ve deney reçeteleri L8 (25) ortogonal serisi baz alınarak hazırlanmıştır. Üretilen kompozitlerin aşınma özellikleri ağırlık kayıpları dikkate alınarak analiz edilmiştir. Deneyler sonucunda aşındırıcı zımpara tipinin aşınma üzerine en etkili faktör olduğu sonucuna ulaşılmıştır. Bununla birlikte artan yükle birlikte aşınma miktarlarının arttığı ve matrise ilave edilen AlB2 parçacıklarının artışıyla birlikte aşınma miktarının azaldığı saptanmıştır.
This study aims to study the abrasive stretching behaviors of AlB2-added metal matrix composites under different test conditions. The Taguchi experimental method has been used while testing the produced composite materials is applied. The matrix type, the supplementation rate, the swinging type, the load and swing speed factors for the swing tests were addressed and the experimental recipes were prepared on the basis of the L8 (25) ortogonal series. The extinction characteristics of the composites produced have been analyzed taking into account weight loss. The results of the experiments have found that the swelling type of swelling is the most effective factor on swelling. However, the increasing load has increased the quantities of exhaust and the quantity of exhaust has decreased with the increase of the AlB2 particles added to the matrix.
In this study, it is aimed to investigate the abrasive wear behavior of AlB2 reinforced metal matrix composites under different test conditions. When applying abrasion tests to the composite materials produced, Taguchi experimental method was used. For wear tests, matrix type, reinforcement ratio, abrasive sandig type, load and shear rate factors are discussed and test recipes are prepared base on L8 (25) orthogonal series. The wear amounts of the produced composites, were analyzed taking into consideration the weight loses. As a result of the experiments, it was concluded that the abrasive sanding type is the most effective factor on wear. However, it was found that the amount of wear increased with increasing load and the amount of wear decreased with the increase of AlB2 particules added to matrix.
Field : Fen Bilimleri ve Matematik; Mühendislik
Journal Type : Uluslararası
Relevant Articles | Author | # |
---|
Article | Author | # |
---|