Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 ASOS INDEKS
 Görüntüleme 11
Preparation and Physicochemical Characterization of Biodiesel from Recycled Vegetable Oil in Cuenca, Ecuador by Transesterification Catalyzed by KOH and NaOH
2023
Dergi:  
Advances in Engineering
Yazar:  
Özet:

: Due to the environmental impact of using fossil fuels, alternatives for the generation of biofuels are being studied. An option for this problem is to obtain biodiesel from recycled vegetable oil. Studies show that basic homogeneous catalysis has advantages such as speed over other types of catalysis. However, most of these studies are conducted with unused or little-used oils. Therefore, this study aims to obtain biodiesel from recycled vegetable oil collected from municipal oil collection centers by transesterification applying NaOH or KOH as catalysts. The used oil was filtered, washed, and dried to remove impurities. The transesterification reaction catalyzed with NaOH and KOH was carried out; each catalyst was tested at two concentrations: 0.5% and 1% w/ w. All reactions were carried out at 55 °C, 350 rpm, methanol, and alcohol/oil ratio of 6/1 for 1.5 h. The best yield was found with the KOH with a concentration of 0.5%. The biodiesel obtained presented the following properties: density of 0.8807 g/mL, a viscosity of 4.694 mm 2/s, an acid number of 0.355 mg KOH/g, and corrosion 1a, a calorific value of 39,726 J/g, and a FAME of 93%.

Anahtar Kelimeler:

0
2023
Yazar:  
Anahtar Kelimeler:

Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler












Advances in Engineering

Dergi Türü :   Uluslararası

Metrikler
Makale : 512
Atıf : 936
Advances in Engineering