Süperhidrofobik yüzeyler nanoteknolojinin bir uygulaması olup, yoğun araştırmalar yapılmaktadır. Su damlası temas açısı 150°’den büyük temas açısına sahip ise “süperhidrofobik” , 90-150° arası olanlar hidrofobik olarak tanımlanır. Bir yüzeyin süperhidrofobik özellik gösterebilmesi için üzerinde mikrometre mertebesinde pürüzlülüğe sahip malzemeden hazırlanmış olması gerekir. Hidrofobik kaplama, günümüz şartlarında sıklıkla ihtiyaç duyulur hale gelmiştir. Bu amaçla mikron ölçekte bakır stearat sentezlenmiştir. Reaksiyon sıcaklığı, karıştırma hızı ve karıştırma zamanı değişken parametreleri Box-Behnken tasarımı kullanılarak temas açısı ölçümleri için cevap fonksiyonu oluşturulmuştur. Cam yüzeyi üzerinde suyun temas açısının açısı 35⁰+-2 derece olduğu ölçüldü. Bakır stearat sentez için yapılan deneylerde sırasıyla sıcaklık, reaksiyon zamanı ve karıştırma hızı incelendi. 20, 40, 60 ⁰C sıcaklık, 2, 6,10 dak. reaksiyon zamanı ve 200,400,600 rpm karıştırma hızı değişkenlerine göre yapılan deneylerde cam yüzey üzerine yapılan kaplamaların temas acıları 126-138.5⁰ arasında değişmektedir. Üç faktörlü Box-Behnken tasarım yöntemi kullanılmıştır. Elde edilen cevap yüzeyi ile bağımsız değişken arasında elde edilen grafikler ve cevap yüzeyi denklemi incelendiğinde en önemli parametrenin sıcaklık olduğu, ikinci önemli parametrenin karıştırma hızı olduğu, reaksiyon zamanı parametresinin ise temas açısındaki etkisinin çok az olduğu belirlendi. Reaksiyon zamanı yerine öncelikle pH, katı sıvı derişimi faktör olarak incelenmesinin yararlı olacağı belirlendi.
Superhydrophobic surfaces are an application of nanotechnology and intensive research is carried out. If the contact angle of the water drop is greater than 150°, the "superhydrophobic" and those between 90-150° are defined as hydrophobic. A surface must be prepared from a material with smoothness in a micrometer staircase above to be able to show superhydrophobic properties. Hydrophobic coating has become frequently needed in today’s conditions. For this purpose, micron scale stearate is synthesized. The reaction temperature, mixing speed and mixing time variable parameters have been created using the Box-Behnken design and the response function for contact angle measurements. The angle of contact of the water on the glass surface was measured to 350+-2 degrees. In experiments for stearate synthesis, the temperature, reaction time and mixture speed were studied accordingly. 20, 40, 60 0C temperature, 2, 6,10 minutes. In experiments based on the reaction time and the 200,400,600 rpm mixing speed variables, the contact pain of the layers made on the glass surface varies between 126-138.50. The three-factor Box-Behnken design method has been used. When the graphics and the equation of the response surface between the obtained response surface and the independent variable were studied, the most important parameter was the temperature, the second important parameter was the mixing speed, and the reaction time parameter had a very small impact on the contact point. Instead of the reaction time, it was determined that it would be useful to first study the pH as a fixed fluid skin factor.
Superhydrophobic surface is one of the applications of nanotechnology and intensive researches have been done in this subject. Surfaces that have water contact angles larger than 150° are called “superhydrophobic” and between 90 -150° are called “hydropobic“ . To exhibit superhydrophobic feature, a surface should have both micron scale roughness and inherently should have been prepared by a hydrophobic material. Hydrophobic coating frequently used in different sectors at the present time. For this purpose it was synthesized nanoscale copper stearate. Reaction temperature, stirring speed and stirring time response function for variable parameters Box-Behnken design using contact angle measurements were formed. The water contact angle on the glass surface was measured to be 35⁰± 2 degrees. In the experiments for copper stearate synthesis, temperature, reaction time and stirring speed were examined respectively. 20, 40, 60 ⁰C temperature, 2,6,10 min. reaction time and 200, 400, 600 rpm, the surface angle of the coatings on the glass surface varies between 126-138,5⁰. Three-factor Box-Behnken design method was used. When the obtained graphs and the response surface equation between the obtained response surface and the independent variable are examined, It was determined that the most important parameter was the mixing speed, the second important parameter was the temperature, and the reaction time parameter had very little effect on the ignition. It was determined that it would be appropriate to select primarily pH, solid liquid concentration in factor instead of reaction time.
Alan : Fen Bilimleri ve Matematik; Mühendislik
Dergi Türü : Uluslararası
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|