Kalsiyum ve Magnezyum elementlerinin (+2) değerlikli iyon halleri sularda sertlik oluşturmaktadır. İnsan sağlığı açısından ciddi riskler oluşturmasa da sert sular sanayide üretim kalitesinin düşmesi, boruların ömrünün azalması, sıcak su üreten ya da tüketen cihazların ömrünün azalması gibi olumsuzluklara sebep olur. Sular CaCO3 eşdeğeri olarak (0 – 75 mg/L) yumuşak, (75 – 150 mg/L) orta sert, (150 – 300 mg/L) sert, ( >300 mg/L) çok sert su şeklinde sınıflandırılmaktadır. Membran Kapasitif deiyonizasyon (MCDI), sertlik türlerinin giderilmesinde etkili bir prosestir. Bu çalışmada sertlik gideriminde arıtılmış suyun kullanım alanı da göz önünde bulundurularak çok sert su sınıfına giren farklı oranlarda Ca2+ ve Mg2+ içeren sular MCDI ile arıtılarak proses suyu ve içme suyu elde edilmeye çalışılmıştır. Çalışmalar neticesinde 300 mg CaCO3/L sertlik içeren sular proses suyu üretiminde %90 - %97 aralığında; içme suyu eldesinde ise %71 - %82 oranlarında arıtılmıştır. Enerji için Maliyet analizi yapıldığında proses suyu için maliyetler 0,01 – 0,02 $/m3 aralığında değişirken içme suyu eldesi için bu maliyet 0,009 – 0,016 $/m3 aralığında değişmektedir.
The ion states of calcium and magnesium elements (+2) form hardness in the water. Although it does not pose serious risks to human health, hard water causes negative effects, such as the decrease in the quality of production in the industry, the decrease in the life of the pipes, the decrease in the life of the devices that produce or consume hot water. CaCO3 equivalences are classified as soft, (75-150 mg/L) medium hard, (150-300 mg/L) hard, (>300 mg/L) very hard water. Membrane Capacitive Deionization (MCDI) is an effective processist in eliminating hardness types. In this study, considering the area of use of water purified in hardness cleansing, the water containing Ca2+ and Mg2+ in different proportions entering the very hard water class was tried to obtain process water and drinking water by purifying with MCDI. According to the study, 300 mg CaCO3/L hardness water is 90% to 97% in process water production and 71% to 82% in drinking water production. When the cost analysis for energy is carried out, the cost for process water varies in the range of 0.01 - 0.02 $/m3, while this cost for the drinking water handle varies in the range of 0.09 - 0.016 $/m3.
Alan : Fen Bilimleri ve Matematik; Mühendislik
Dergi Türü : Uluslararası
Benzer Makaleler | Yazar | # |
---|
Makale | Yazar | # |
---|