Özet:

Petroleum-water separation systems are important in terms of the obtaining of cleaned oil from the water, while the need for water is increasing in the present conditions, the importance of the obtaining of separated water is also important. This study includes a series of studies carried out with hole combined plates that are widely used in oil-water mixture separation systems. The oil-water mixture with different characteristics is taken from three different oil fields and pumped into the separation system at different speed values (0.5, 0.7, 0.9 m/s). In this experimental study, the measurements were carried out at 25 C. The result of the experiment was measured by measuring the oil ratio in the divided water and determined the dividing efficiency values, and the dividing efficiency of the oil-water mixture for three different Re numbers of each sample was studied. The relationship between the resulting separation efficiency values and the pumping speed of the mixture in the system is interpreted and interpreted. The result of the experiments and analyses was observed that the divide efficiency value achieved increased to a certain point in proportion to the number of Re and then fell due to the flow characteristics and the geometry of the joint plate applied. The best separation efficiency value was achieved in the number 2660,76 Re, initially using the oil-water mixture containing 11% oil; in the separated water, the oil rate was measured by 0.5%.

Anahtar Kelimeler: