Abstract:

The impact of the chloride ions concentration and the temperature of the circulating water on the process of corrosion destruction of carbon steel and cast iron has been investigated. It has been shown that an increase in the concentration of chloride ions causes a shift in the values of the stationary potentials of steel and cast iron to the region of negative values and reduces the passive state of these alloys. This leads to an increase in the corrosion rate of St.3 steel and CI 18-36 cast iron. The results of electrochemical studies have shown that the more reliable protective films are formed on steel than on cast iron. The limiting concentration of NaCl, at which reliable operation of equipment made from these alloys is possible, depends on the pH of the solution. At pH=7, it is about 1.2 g l-1, which is about an order of magnitude less than at pH=12. When the circulating water temperature rises, the corrosion rate of steel and cast iron increases. The stationary potentials of steel and cast iron are shifted to the negative range, and the polarization of the anode process decreases. Corrosion process is limited by the rate of oxygen supply to the cathode areas Author Biographies Hanna Pancheva, National Technical University «Kharkiv Polytechnic Institute» Kyrpychova str., 2, Kharkiv, Ukraine, 61002 PhD, Assistant Department of labor and environment protection

Keywords: