Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 11
 İndirme 3
KONİK IŞINLI BİLGİSAYARLI TOMOGRAFİ KULLANILARAK İNFRAORBİTAL KANAL VE SULKUSUN RETROSPEKTİF OLARAK İNCELENMESİ
2019
Dergi:  
Current Research in Dental Sciences
Yazar:  
Özet:

Amaç: Bu çalışmanın amacı infraorbital kanal (İOK) ve infraorbital sulkusun (İOS) anatomik lokalizasyonunun konik ışınlı bilgisayarlı tomografi (KIBT) kullanılarak incelenmesidir.   Materyal ve Metot: Çalışmamızda 125 hastanın KIBT görüntüleri retrospektif olarak incelenerek İOK ve İOS’nin anatomik özellikleri belirlendi. Bulgular: İOK uzunluğu 11.73 ± 1.90 mm, İOS uzunluğu 16.15 ± 2.90 mm, ikisi arasındaki açı 154.3 ± 8.57° ve kanalın doğrultusunun horizontal düzlem ile yaptığı açı 41.02 ± 7.60° ölçüldü. Sonuç: Bu çalışma KIBT’nin cerrahi olarak önem taşıyan anatomik noktaların mesafelerini belirleyerek maksillofasiyal cerrahi sırasında nörovasküler yapıların hasar görmesinin önlenmesi, lokal anestezi uygulamaları ve diğer invaziv işlemler için yol gösterici olabileceğini ortaya koyuyor. Anahtar Kelimeler: Konik ışınlı bilgisayarlı tomografi, infraorbital kanal,  infraorbital sulkus  RETROSPECTIVE MORPHOMETRIC ANALYSIS OF THE INFRAORBITAL CANAL AND INFRAORBITAL SULCUS WITH CONE BEAM COMPUTED TOMOGRAPHY ABSTRACT   Aim: The aim of our study is to evaluate of anatomical localization of infraorbital foramen, canal and sulcus by using cone beam computed tomography. Material and Method: In this descriptive study, cone beam computed tomography images of 125 patients were retrospectively analyzed. Infraorbital canal and sulcus’s anatomic variation are determined. Results: The average length of infraorbital canal was 11.73 ± 1.90 mm, infraorbital sulcus was 16.15±2.90 mm, the angle between two of them was 154.3 ± 8.57° and the angle between the horizontal plane and the direction of the channel was 41.02 ± 7.60°. Conclusion: This study suggests that cone beam computed tomography may lead the way for prevention of damage to neurovascular structures during maxillofacial surgery by determining the distance of surgically important anatomical landmarks, local anesthesia practices and other invasive procedures. Key Words: Cone beam computed tomography, infraorbital canal, infraorbital sulcus

Anahtar Kelimeler:

The Infrorbital Channel and SULKUS RETROSPECTIFS by using CONIC TOMOGRAPHY
2019
Yazar:  
Özet:

Purpose: The purpose of this study is to study the anatomical localization of the infraorbital channel (IOC) and infraorbital sulcus (IOS) using conic radiated computer tomography (KIBT).   Material and Method: In our study, 125 patients’ KIBT images were retrospective examined and the anatomical characteristics of IOC and IOS were determined. Results: IOC length is 11.73 ± 1.90 mm, IOS length is 16.15 ± 2.90 mm, the angle between the two is 154.3 ± 8.57° and the angle of the direction of the channel is 41.02 ± 7.60° with the horizontal flatness. The result: This study shows that determining the distances of the anatomical points of the KIBT that are of a surgical importance may be a guide for the prevention of damage to the neurovascular structures during the maxillopathic surgery, local anesthesia applications and other invasive processes. Keywords: Infrared computer tomography, infrared canal, infrared sulkus RETROSPECTIVE MORPHOMETRIC ANALYSIS OF THE INFRAORBITAL CANAL AND INFRAORBITAL SULCUS WITH CONE BEAM COMPUTED TOMOGRAPHY ABSTRACT Aim: The aim of our study is to evaluate of anatomical localization of infrared foramen, canal and sulcus by using cone beam computed tomography. Material and Method: In this descriptive study, cone beam computed tomography images of 125 patients were retrospectively analyzed. Infraorbital canal and sulcus's anatomical variation are determined. Results: The average length of the infraorbital canal was 11.73 ± 1.90 mm, the infraorbital sulcus was 16.15 ± 2.90 mm, the angle between two of them was 154.3 ± 8. 57° and the angle between the horizontal plane and the direction of the channel was 41.02 ± 7.60°. Conclusion: This study suggests that cone beam computed tomography may lead the way for prevention of damage to neurovascular structures during maxillofacial surgery by determining the distance of surgically important anatomical landmarks, local anesthesia practices and other invasive procedures. Keywords: Cone beam computed tomography, infraorbital canal, infraorbital sulcus

Anahtar Kelimeler:

0
2019
Yazar:  
Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler










Current Research in Dental Sciences

Dergi Türü :   Ulusal

Metrikler
Makale : 1.431
Atıf : 2.156
Current Research in Dental Sciences