Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 10
 İndirme 1
An Inclusive Study on the Effect of Strain Rate on the Stress-Strain Behavior and the Undrained Shear Strength of Clay Soils in Kombolcha, Ethiopia
2022
Dergi:  
Engineering, Technology & Applied Science Research
Yazar:  
Özet:

Abstract This research aims to study the effect of strain rate on the stress-strain association and shear strength of clay soils in Kombolcha, Ethiopia. Field and laboratory experimentations were conducted on 3 soil samples collected at 4.5m depth, considering the physical and engineering properties of the soil. Unconsolidated, undrained triaxial compression tests were performed under confining pressure on the specimens that were axially loaded at a rate of strain varying from 0.38mm/min to 1.14mm/min by taking 2 points above and below 1% of the specimen height. Stress-strain relations were developed under the stated different rates of strains to describe their effect. It was revealed that the strain rate effect was observed. By increasing the strain rate shifts the stress-strain curve upward, and the corresponding shear strength of the soil also increased under effective stress. Accordingly, the strain rate increased the shear parameters. The average angle of friction increased by 13.43%, 15.08%, 13.18%, and 14.33% when the rate of strain changed from 0.38 to 0.57mm/min, 0.57 to 0.76mm/min, 0.76 to 0.95mm/min, and 0.95 to 1.14mm/min respectively, while the average cohesion increased by 17.67%, 19.52%, 14.87%, and 16.48%. The failure at strain rate 1%/min of sample height (0.76mm/min) was uniformly distributed and there was uniform pore pressure distribution throughout the sample height. The effect is slightly more when the shear strength increased at the left side than at the right side. Average shear strength parameters such as cohesion and angle friction were recorded for strain rates from 0.57mm/min to 1.25mm/min specifically for the clay soils found in Kombolcha town, Ethiopia.

Anahtar Kelimeler:

Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler










Engineering, Technology & Applied Science Research

Dergi Türü :   Uluslararası

Metrikler
Makale : 1.845
Atıf : 2.898
2023 Impact/Etki : 0.733
Engineering, Technology & Applied Science Research