Özet:

: Aiming at the problem of grain breakage during the harvesting of fresh corn, this paper theoretically analyzes the collision process between the ear picking device and the corn ear, and a flexible ear picking structure composed of flexible materials and buffer springs is determined. Combined with a new harvesting method that reverses the growth direction from top to bottom, a reverse flexible ear plucking device for fresh corn was designed. We used the ADAMS software to simulate the ear picking process of fresh corn, analyze the contact force between the rigid structure and flexible buffer structure under different picking claw speeds and stalk feeding speeds, and obtain the optimal parameter combination: the picking claw speed was 2 m/s, and the stalk feeding speed was 1 m/s. On the basis of the simulation, a reverse flexible fresh corn harvesting bench was built, and the optimal operating parameters were obtained from the test: the speed of ear picking claws was 2.11 m/s; the number of ear picking claws was four; the thickness of the flexible body was 4.52 mm; the stem feeding speed was 1.04 m/s; the corresponding grain breakage rate was 0.128%, which was far lower than the national standard (0.5%); and the ear impurity content was 0.3%, which was far lower than the national standard (2%). The results are consistent with the simulation results, proving that the model is reliable. This research achieved the harvest of fresh corn ears with a low grain damage rate, verified the possibility of reverse flexible ear picking, and provided a reference for the research and development of low-damage fresh corn harvesting machines.

Anahtar Kelimeler: