Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 ASOS INDEKS
 Görüntüleme 13
Output voltage estimation of a power transformer integrated with three-phase T-type inverter
2023
Dergi:  
Journal of Energy Systems
Yazar:  
Özet:

The issues related to integrating these systems into the grids continue to gain importance with the increasing use and importance of renewable energy sources. Therefore, the importance of power distribution transformers is increasing. Besides, these power distribution transformers are connected to the grid with power electronics circuits and inverters. Considering the modular inverter structures, ease of maintenance, and connection, three-level T-type inverters are chosen for this study. The secondary output voltage of the power transformer is estimated by using circuit parameters such as the dead time of the inverter circuit, PWM switching frequency, and modulation rate. Based on the finite element analysis analysis according to the selected parameters, 810 data are obtained with time-dependent parametric analysis. The adaptive neuro-fuzzy inference system model is constructed by considering the simulation data to estimate the secondary output of the power transformer of these parameters. In the training phase of the model, 648 randomly selected data from 810 data obtained by ANSYS-Electronics/Simplorer are used. The remaining 162 data are used in the testing process to measure system performance. As a result of the analysis made by ANFIS, the Root Mean Square Error (RMSE) error is found as 2.475%. Since the values obtained in the estimation process of the study are very close to the simulation values, the ANFIS method can be used as an estimation method that will give accurate results during the design phase.

Anahtar Kelimeler:

0
2023
Yazar:  
Anahtar Kelimeler:

Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler










Journal of Energy Systems

Dergi Türü :   Uluslararası

Journal of Energy Systems