Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 23
 İndirme 1
Computational Analysis of Effects of Location of the Diverter Plate and Inlet Velocity on the Efficiency of Two-Phase Flow Separator
2019
Dergi:  
Politeknik Dergisi
Yazar:  
Özet:

Two-phase horizontal gravity separators are generally used in the petroleum industry for gas and liquid separation. There are several studies in the relevant literature that reports various methods to determine the optimum diameter and length of the separator. Although the diverter plate is used to increase the separation speed, there is not any exact approach for specifying the appropriate location of the diverter plate on the inlet pipe. In the present study, the main volume of the separator is defined for a particular amount of mixture of oil and gas. Effects of the location of the diverter plate and inlet velocity on the separation efficiency are investigated for three locations of the diverter plate (100 mm, 150 mm, 200 mm) and four different inlet velocities (0,25 m/s, 0,5 m/s, 0,75 m/s, 1 m/s) by means of computational fluid dynamics (CFD) method. Two-phase, three-dimensional (3D) and fully turbulent flow simulations reveal that the highest separation efficiency is obtained as 99% when the straight diverter plate is 200 mm far away from the top inlet and the inlet velocity is 0,25 m/s.

Anahtar Kelimeler:

0
2019
Yazar:  
Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler










Politeknik Dergisi

Alan :   Mühendislik

Dergi Türü :   Uluslararası

Metrikler
Makale : 1.729
Atıf : 5.013
2023 Impact/Etki : 0.223
Politeknik Dergisi