Abstract:

The influence of natural antioxidants from different types of vegetable raw materials on the processes of oxidative and hydrolytic spoilage of sunflower oil during storage is studied. Plant antioxidants are more environmentally friendly and safer than synthetic ones. Green tea leaves and oak bark were used as vegetable raw materials. Water-ethanol extracts from vegetable raw materials were added to oil samples in experimental concentrations. The samples were stored in the laboratory conditions at the temperature of (20±2) °C. The study was performed for 5 months. The values of the acid and peroxide numbers were determined. The most effective blend of antioxidants showed the increase in the acid number from 0.12 to 0.20 mg KOH/g (concentration of green tea extract – 0.05 %, without the addition of oak bark extract). According to the values of the peroxide number, the most effective blends of antioxidants were the experiment points with the following green tea extract:oak bark extract ratio: (0.05:0.05) %, (0.025:0.025) %, (0.025:0.05) %, (0.05:0.025) %. To determine the induction period of oil and, accordingly, its shelf life under experimental conditions, the values of the peroxide numbers were used. It is rational to use extractives from oak bark and green tea under the following conditions: the concentration of each of the antioxidant extracts in terms of dry matter – (0.025‑0.04) %. The maximum induction period is 100 days.The efficiency of natural antioxidants in terms of the concentration of oak bark and green tea extracts is 0.05 and 0.025 %, respectively, was compared to the effectiveness of the corresponding concentration of one of the synthetic antioxidants – butylhydroxyanisole. When using butylhydroxyanisole, the induction period of oil was 65 days, and when using natural antioxidants – 74 days Author Biographies Natalia Sytnik, Ukrainian Research Institute of Oils and Fats of National Academy of Agrarian Sciences of Ukraine Dziuby ave., 2a, Kharkiv, Ukraine, 61019 PhD Department of Studies of Technology for Processing Oils and Fats

Keywords: