Kullanım Kılavuzu
Neden sadece 3 sonuç görüntüleyebiliyorum?
Sadece üye olan kurumların ağından bağlandığınız da tüm sonuçları görüntüleyebilirsiniz. Üye olmayan kurumlar için kurum yetkililerinin başvurması durumunda 1 aylık ücretsiz deneme sürümü açmaktayız.
Benim olmayan çok sonuç geliyor?
Birçok kaynakça da atıflar "Soyad, İ" olarak gösterildiği için özellikle Soyad ve isminin baş harfi aynı olan akademisyenlerin atıfları zaman zaman karışabilmektedir. Bu sorun tüm dünyadaki atıf dizinlerinin sıkça karşılaştığı bir sorundur.
Sadece ilgili makaleme yapılan atıfları nasıl görebilirim?
Makalenizin ismini arattıktan sonra detaylar kısmına bastığınız anda seçtiğiniz makaleye yapılan atıfları görebilirsiniz.
 Görüntüleme 4
Analysis and Compensation of Dead Time Harmonics Based on Time Compensation Strategy in the Single-Phase Full-Bridge Inverters
2024
Dergi:  
Balkan Journal of Electrical and Computer Engineering
Yazar:  
Özet:

A short period, called dead time, is implemented to prevent power switching devices from shoot-through in voltage-source inverters (VSI). While adding dead time is required in the switching signals, it also causes negative effects on inverter operation such as distortion at output voltage due to significant number of harmonic components, and reduction in voltage magnitude of fundamental components. Eventually, the negative effects caused by dead time have to be compensated with compensation schemes. Different modulation schemes, which are called unipolar and bipolar switching, can be implemented in VSI, which in return might change the dead time effect. Although analysis of bipolar switching on the dead time effect has been implemented, analysis of unipolar switching is not addressed by most. In this paper, the effect of dead time on unipolar sinusoidal pulse width modulation (SPWM) is analyzed, the principle of the proposed compensation strategy is described in detail and the time compensation method with unipolar SPWM scheme is implemented using microprocessor-STM32F407G. The technique is intensively simulated and the evaluated through experimental results on resistive and resistive-inductive loads by comparing uncompensated and compensated states. Simulation and experimental results are presented to demonstrate and confirm the validity of the proposed dead-time compensation method.

Anahtar Kelimeler:

0
2024
Yazar:  
Atıf Yapanlar
Bilgi: Bu yayına herhangi bir atıf yapılmamıştır.
Benzer Makaleler










Balkan Journal of Electrical and Computer Engineering

Alan :   Mühendislik

Dergi Türü :   Uluslararası

Metrikler
Makale : 450
Atıf : 396
2023 Impact/Etki : 0.101
Balkan Journal of Electrical and Computer Engineering